Why wont my windows work in my Dodge Journey?

If the windows in your Dodge Journey are not working, there could be several possible causes. Here are some potential reasons and solutions based on the search results:
Faulty Driver Door Switch:
– One possible cause is a faulty driver door switch. If the windows go down when pressing the individual switches on each door but not when using the driver door switch, then you may need to replace the driver door switch.
Fuse Issue:
– Another potential cause could be a blown fuse. Check the fuse box under the hood and under the dash on the passenger and driver side to see if any fuses related to the windows are blown. If you find a blown fuse, replace it and see if the windows start working again.
Power Door Modular Issue:
– In some cases, the issue may be with the power door modular. This is a black box located in the door with three connectors. If this modular is faulty, it can cause issues with the windows. You may need to replace the power door modular to resolve the problem.
Battery Replacement or Disconnection:
– If the windows stopped working after the 12-volt battery has been replaced or disconnected, it could be a result of the battery replacement. In this case, performing a reset procedure may restore the auto functionality of the windows.
Window Motor or Wiring Issues:
– The power window motors in your Dodge Journey can fail over time. If you have verified that the motor is getting power but it is not working, you may need to replace the window motor. Wiring issues can also cause window problems, so it’s worth checking the wiring as well.
Other Potential Causes:
– Other potential causes for window issues in a Dodge Journey include a broken wire between the door and door jam, a broken module on the driver side, or an electrical issue. These issues may require further inspection and diagnosis.
It’s important to note that these are just potential causes and solutions based on the search results. If you are unsure about the exact cause of the window issue in your Dodge Journey, it is recommended to consult a mechanic or an electrician who specializes in Dodge Journeys for a more accurate diagnosis and repair.

How do I fix my power window not working?

Here are some basic troubleshooting tips to try when your electric windows won’t roll up or down:

1. Check the window safety lock-out switch.
2. Check the fuses.
3. Push the window switch up and down and listen.
4. Push the window switch and watch the dash gauges.
5. Try the other switches.
6. Swap switches if possible.

How do I reset my car window roll up?

Down. And hold the button down for five seconds. And then pull it all the way up. And once it’s all the way up hold the button for five seconds and that reprograms. It hope that helps.

How do I reset my windows power?

Hold the key down for 2-5 seconds after the window is down.
Once your window is all the way down, hold the button down for 2-5 seconds. Release the button after you’ve held it down for a short period of time. On some vehicles, the required time to reset the window is 2 seconds. On others, it is 5 seconds.

Why wont my passenger side window roll down?

It sounds like you need a new window switch. If the motor works going up but you can’t get it to go down it sounds like it just isn’t being told to work, but the motor works so you probably need a window switch. Try it at the driver’s door panel switch and the passenger door switch.

What would cause windows to stop working?

Electrical problems from the window switch –– the button you press to raise or lower the window –– can also cause window problems. Every time you press it, the switch signals the motor and window track to open or close the windows. Damaged, loose, or faulty wires can interrupt signaling and cause the windows to stall.

Why is my Dodge Journey rear window not working?

The most common reasons a Dodge Journey window won’t go up or down are window’s electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.

Why did my automatic car window stop working?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

Is there a fuse for power windows?

Check the fuse
Other cars have individual fuses for each window motor so failure will only affect the one window. In some cars the fuse is in the main fusebox but many makers use in-line fuses so check with your manual to find where the fuse is and replace it if blown.

What causes a power window switch to go bad?

4) The power window switch can go bad
Over time this switch can go bad and need to be replaced. This switch can also become faulty if it’s subjected to moisture from a window leak or liquids spilled that seep into the working components.

How do I know if my power window fuse is blown?

If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.