Why wont my Subaru Legacy window go up?

Possible Causes of Subaru Legacy Window Not Going Up
There are several potential causes for a Subaru Legacy window not going up. Here are some common issues that could be responsible:
1. Broken Window Regulator: The window regulator is a mechanical system that raises and lowers the window. If the window glass becomes disconnected from the regulator, the motor burns out, or something becomes stuck in the system, the window may not be able to move. In such cases, it is recommended to visit a trained Subaru expert to disassemble the door and access the window regulator to identify and replace the faulty component.
2. Faulty Window Switch or Motor: If the window switch or motor is not functioning properly, it can prevent the window from going up. The switch or motor may need to be replaced in such cases. It is worth noting that power window motors can fail over time, and the process is usually gradual.
3. Wiring Issues: Wiring problems can also cause the window to malfunction. If there is a problem with the wiring, it may need to be repaired or replaced to restore proper functionality.
4. Fuse Issue: A blown fuse can also prevent the window from going up. Checking the fuse box and replacing any blown fuses may resolve the issue.
5. Initialization Procedure: In some cases, the window may need to be initialized or reset. This is especially relevant if the vehicle’s battery has been disconnected. Following the proper initialization procedure, which may vary depending on the specific model and year of the Subaru Legacy, can help resolve the issue .
It’s important to note that these are general potential causes, and the specific cause of the window not going up in a particular Subaru Legacy may vary. It is recommended to consult a trained Subaru technician or refer to the vehicle’s manual for more specific troubleshooting steps.
I hope this helps! Let me know if you have any other questions.

Why won t my subaru impreza window go up?

The most common reasons a Subaru Impreza window won’t go up or down are window’s electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.

How do I know if my window switch is broken?

Signs Of A Bad Power Window Regulator, Motor Assembly or Switches

1. Windows Won’t Roll Up or Down or Require Several Tries.
2. You Are Only Able To Control Windows From The Master Switch.
3. Grinding or Clicking Noises When Rolling Window Up or Down.
4. Window Rolls Up or Down Too Slow Or Too Fast.

How do you reset a power window switch?

Hold the key down for 2-5 seconds after the window is down.
Once your window is all the way down, hold the button down for 2-5 seconds. Release the button after you’ve held it down for a short period of time. On some vehicles, the required time to reset the window is 2 seconds. On others, it is 5 seconds.

How do you fix an electric window that won’t go up?

If your window won’t roll up, check the fuse, try other window switches, and inspect for obstructions before seeking professional help. Can you manually raise a power window? You can manually raise a power window by carefully holding the glass and applying upward pressure while someone operates the window switch.

How do you fix a Subaru window that won’t roll up?

On the passenger side window. So again windows up you roll down the window. All the way down. And you hold it for five seconds. And then you let go roll. It back up. Hold it again for five seconds.

How do you roll up a power window that won’t roll up?

If you can, try to slam the car door while pressing the switch to roll the window up. This can also help jolt the motor back to life if it’s starting to go. It doesn’t fix the motor, but it might just get that window back up.

Why won’t my Subaru Legacy window go up?

The most common reasons a Subaru Legacy window won’t go up or down are window’s electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.

How do you reset the window switch on a Subaru Legacy?

So all you needed to do was a simple reset push. And hold down push. And hold up for about five seconds. And everything we’re skin good to go.

Why wont my car window suddenly go up?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

Is there a fuse for each power window?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.