Why wont my rear windows go up in my Chevy Colorado?

Possible Causes for Rear Windows Not Going Up in a Chevy Colorado
Based on the search results, there are several potential causes for the rear windows not going up in a Chevy Colorado. Here are some possible reasons:
1. Window Motor or Regulator: The rear window motor or regulator could be defective or binding, preventing the window from going up.
2. Power Window Switch: The power window switch, either on the driver’s door or the rear door, could be defective.
3. Wiring Issues: There could be wiring issues in the rear door, affecting the operation of the window.
4. Lock Out Switch: Some vehicles have a lock out switch for the rear windows. Make sure this switch hasn’t been pressed.
5. Battery Replacement or Disconnection: If the 12-volt battery has been replaced or disconnected, it may affect the auto functionality of the windows. Performing a reset procedure may restore the auto functionality.
Troubleshooting Steps
To diagnose and fix the issue with the rear windows not going up in your Chevy Colorado, you can try the following steps:
1. Check the Lock Out Switch: Ensure that the lock out switch for the rear windows hasn’t been pressed.
2. Inspect the Power Window Switch: Check the power window switch on the driver’s door and the rear door for any signs of damage or malfunction.
3. Check the Wiring: Examine the wiring in the rear door for any loose connections or damage. If necessary, consult a professional for further inspection and repair.
4. Reset the Auto Functionality: If the 12-volt battery has been replaced or disconnected, perform a reset procedure to restore the auto functionality of the windows.
If these troubleshooting steps do not resolve the issue, it is recommended to consult a qualified mechanic or contact a Chevrolet dealership for further assistance.
Please note that the information provided is based on general knowledge and may not be specific to your exact vehicle model or situation. It is always best to consult a professional for accurate diagnosis and repair.
I hope this helps! Let me know if you have any other questions.

Why would only one power window not work?

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

Why will my window roll down but not up?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

Does each window have its own fuse?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.

Does each power window have its own fuse?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.

Is there a fuse for each power window?

There is no separate fuse or relay for each of the power windows. They are all powered by the one circuit breaker and relay. If the RH front power window is not working the problem is either in the wiring, the switches or the motor.

How do I know if my power window fuse is blown?

#3: Blown Fuse
This begins by looking for a blown fuse that prevents electricity from reaching a power window mechanism. Check if all or a pair of windows aren’t working. If this is the case, it’s probably a problem fuse.

How do you manually raise a power window?

Stand at the end of the open door and place one palm on the outside of the window and the other palm facing it on the inside of the window. Pressing the glass firmly between your palms, slowly move your hands up to raise the window.

How do I get my back window to roll up?

Rolling Up Stuck Power Window

1. Open and slam your door while holding the window switch in the up position while the ignition is on.
2. Hold the window switch in the up position and hit the spot over the motor with something blunt, like your fist.

Why are my electric windows not working?

What Can Cause Electric Windows to Fail? There are three main things that cause power windows to fail: blown fuses, bad switches, and burned out motors. It’s also possible for the window regulator to wear out, bend, or get stuck, although this is less common.

How do you fix an electric window that won’t go up?

If your window won’t roll up, check the fuse, try other window switches, and inspect for obstructions before seeking professional help. Can you manually raise a power window? You can manually raise a power window by carefully holding the glass and applying upward pressure while someone operates the window switch.