Why wont my key turn in the ignition Subaru Crosstrek?

If your key won’t turn in the ignition of your Subaru Crosstrek, there could be a few possible reasons for this issue. Here are some potential causes and solutions based on the search results:
Steering Wheel Lock:
– One common reason for the key not turning in the ignition is the steering wheel lock. The steering wheel lock puts pressure on the ignition lock, and sometimes it takes some movement to free it. Try jiggling the steering wheel while you jiggle the key to see if that helps.
Faulty Solenoid:
– Another possible cause could be a faulty solenoid in the ignition switch. If the solenoid is bad, it may prevent the key from turning. In such cases, it may be necessary to have the solenoid replaced by a professional technician.
Shifter Plate Issue:
– In some cases, the key getting stuck in the ignition may be related to a problem with the shifter plate. The shifter plate may need to be replaced or adjusted to resolve the issue. It’s recommended to have the vehicle inspected by a Subaru dealer or a qualified mechanic to diagnose and address this problem.
Other Factors:
– There could be other factors contributing to the issue, such as a design issue with the steering lock interlink or a sticky solenoid in the ignition switch . It’s important to have a professional technician diagnose the problem to determine the exact cause and provide the appropriate solution.
Please note that these suggestions are based on general information and may not apply to every specific case. It’s always best to consult with a professional mechanic or contact Subaru customer support for accurate diagnosis and guidance.
I hope this helps! Let me know if you have any other questions.

Why wont my Subaru let me turn the key?

It should allow you to turn your ignition. It will release the steering wheel lock. And at that point you can start the vehicle normally.

Why does my Subaru ignition lock?

If the steering wheel is moved without a key in the ignition, the wheel and the ignition cylinder will lock up. This is to prevent hotwiring. This security feature is easy to accidentally activate, and it’s just as easy to turn off. Gently move the wheel while you continue to turn the key.

Why isn’t my key turning when I put it in the ignition?

While this probably means that the steering column lock has been engaged. And you won’t get to turn the steering wheel. It’s an anti-theft device. But don’t worry it’s easy to disengage.

How do you unlock the steering wheel on a Subaru crosstrek?

Give it up. Never get in your car. Notice that the steering wheel is blocked.

Why is my key not turning in the ignition Subaru crosstrek?

The most common reasons a Subaru Crosstrek key won’t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

How do you unlock an ignition lock cylinder?

And mark that spot with an X. If. You drive a Saab this is not your excuse to fumble your passengers leg. The final step to unlocking your ignition lot is to take your favorite handgun.

How do you unlock a Subaru steering wheel?

And can’t start the ignition. Give it up. Never get in your car. Notice that the steering wheel is blocked.

How do you disengage a steering lock?

There’s a dead bolt in the steering column. And a rack and pinion gear. That actually causes that dead bolt to engage. And disengage to lock the steering.

Why my car is not opening with key?

Car key sensor is not working: If the key is not working at all, it may be due to the drained battery, faulty fob, low car battery, or faulty keyless entry system (if applicable). You can try replacing the fob batteries, diagnosing the fob or towing the vehicle to a service centre to fix the issue.

How do you start a Subaru Crosstrek with a dead key?

It’s like I’m clicking lock clicking unlock nothing’s changing here. But foots on the brake. It can detect the chip. On. You go simple as that.