Why wont my Dodge Dart window go down?

If your Dodge Dart window won’t go down, there could be several possible causes. It’s important to note that without further information or a physical inspection, it’s difficult to determine the exact cause. However, here are some potential reasons based on the search results:
Possible Causes:
1. Fuse, Relay, or Electrical System: A faulty fuse, relay, or electrical issue could prevent the window from functioning properly.
2. Window Motor: A malfunctioning window motor could be the culprit. If the motor is not working, the window won’t go down.
3. Window Regulator: The window regulator is responsible for moving the window up and down. If it is damaged or broken, the window may not move.
4. Switch: The window switch could be faulty, preventing the window from going down.
5. Wiring Issues: Wiring problems can disrupt the power supply to the window motor, causing it to malfunction.
6. Mechanical Blockage: There may be a mechanical blockage, such as a tangled or damaged window regulator cable or broken seals or glass guides, preventing the window from moving.
Troubleshooting Steps:
1. Check the fuse box for any blown fuses related to the power windows. If you find a blown fuse, replace it with a new one of the same rating.
2. Test the window switch by swapping it with a known working switch from another window. If the window works with the swapped switch, the original switch may be faulty and needs to be replaced.
3. Inspect the window motor and regulator for any signs of damage or malfunction. If necessary, replace them with new ones.
4. Examine the wiring harness for any visible damage or loose connections. Repair or replace any damaged wiring.
5. If you suspect a mechanical blockage, such as a tangled cable or broken seals, it may be necessary to remove the door panel and inspect the window regulator and glass guides. If any components are damaged, they should be repaired or replaced.
It’s recommended to consult a professional mechanic or bring your vehicle to a Dodge dealership for a thorough inspection and accurate diagnosis of the issue. They will have the expertise and tools to identify and resolve the problem effectively.
Remember, these are general troubleshooting steps, and the specific solution may vary depending on the exact cause of the issue.

What to do if my window is stuck down?

Turn the Car On – Make sure the car ignition is set to the on position. Press and Hold – Press the switch down in the desired direction and make sure to keep the button depressed while completing the other steps. Slam the Door – With the button held down, slam the car door and repeat if unsuccessful on the first try.

How do I know if my window switch or motor is bad?

How do you know if it’s the window regulator or the motor? If the window glass is going up crooked, sags into the door when it’s not being used, or it has fallen, it’s a window regulator issue. If it’s an issue of movement, then the window motor is the usual suspect.

How do you manually roll up a power window with a bad motor?

Rolling Up Stuck Power Window

1. Open and slam your door while holding the window switch in the up position while the ignition is on.
2. Hold the window switch in the up position and hit the spot over the motor with something blunt, like your fist.

Why are my electric windows not working?

Visually inspect cables or window guides for broken or misaligned pieces. If you see a loose or broken cable and hear the motor moving when you hit the window switch, the window regulator may need to be replaced. If the cables are intact and the guides are aligned, the window motor may have stripped gears.

Why is my car window not going down?

The electric window motor is probably bad, or the regulator could be stuck. Push the window switch and watch the dash gauges. This is another easy way to rule out a bad switch. If the volt gauge on your dash moves even the tiniest bit when you push the switch, suspect a bad motor.

How do I know if my power window fuse is blown?

2. Blown Fuse. When you are having issues with your power windows, you may still hear them trying to work when you push the button. However, if you hear nothing at all, a fuse might be to blame.

Is there a fuse for each power window?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.

How can you tell if a window fuse is blown?

If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Can you manually raise a power window?

Stand at the end of the open door and place one palm on the outside of the window and the other palm facing it on the inside of the window. Pressing the glass firmly between your palms, slowly move your hands up to raise the window.

Why would only one power window not work?

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.