Why won t my subaru outback tailgate open?

Possible Causes of Subaru Outback Tailgate Not Opening
If your Subaru Outback tailgate won’t open, there are several potential causes to consider:
1. Rear Liftgate Sensors: The most common cause of a Subaru Outback trunk not opening is related to issues with the rear liftgate sensors. This can lead to the trunk being finicky or difficult to understand, but there are troubleshooting procedures that can be tried at home before taking it to a dealership.
2. Obstacle Sensors or Sensor Malfunction: Three beeps when attempting to open or close the hatch may be related to something blocking the obstacle sensors or a sensor malfunction.
3. Manual Opening: It’s possible to manually open the Subaru Outback trunk by locating the small plastic square by the latch from the inside of the car and moving it upward. However, this should only be used for emergency use as it could cause damage.
4. Battery or Key Fob Issues: A dead car battery, faulty key fob, or a stuck trunk latch could also be the cause of the trunk not opening. These issues can be diagnosed and repaired to get the trunk working again.
5. Lock Actuator: Problems with the lock actuator, a small motor responsible for controlling the lock on the trunk, can also prevent the trunk from opening. If this motor is faulty or dead, the trunk latch will not work to open the trunk.
6. Power Liftgate Reset: In some cases, resetting the power liftgate by pressing and holding the rear liftgate close button until it beeps at least four times may resolve the issue.
7. Manual Opening Methods: Depending on the model year of the Subaru Outback, there are specific methods for manually opening the trunk from the inside in case of a dead battery or other issues .
Conclusion
If you’ve exhausted troubleshooting at home and the issue persists, it may be necessary to seek assistance from a dealership or a qualified automotive technician to diagnose and resolve the problem with the Subaru Outback tailgate.

Why is my Subaru Outback trunk not closing?

Solution – while the hatch was down, Hold the button under the Subaru emblem for 10 seconds. This was a hard reset and after that the hatch worked as normal. Easy, no worries.

How do you reset the liftgate on a Subaru Forester?

Let’s. Say you’re out at the mall. Doing some shopping you get out to put your bags in the hatch. And it’s just not opening with the either the button or the the button on the hatch.

Can you open a power tailgate manually?

When the power door ON/OFF button is OFF (depressed), the power tailgate can not be controlled with the sub control buttons or tailgate handle. However, the tailgate may be opened manually by pulling the exterior handle and lifting the tailgate upward.

How do you reset the tailgate on a Subaru Outback?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.

How do you reset the lift gate on a Subaru Outback?

The power rear gate memory will be saved and automatically turned on in your touch.

How do you manually open the tailgate on a Subaru Outback?

Press the button on the underside trim above the license plate the rear gate will automatically. Open you can also press the lock button on the rear gate to simultaneously. Close the rear gate and

What can cause your trunk to not open?

If the trunk refuses to open using the key, then either the trunk lock cylinder or the metal rod could be the issue. An unresponsive trunk lock actuator can also be caused by a faulty trunk lock relay.

Why won’t my trunk open in my Subaru Outback?

1 Answer. To reset the electronic rear latch mechanism, close the gate, press and hold the exterior latch button for 10 seconds. You will feel it re-locking the latch. At this point, the gate will open, close, and lock normally.

Why is my automatic liftgate not working?

A lift strut issue, a malfunctioning power hatch, and a bad switch or button are some of the common reasons why a power liftgate may malfunction. The buttons, fuses, and electrical connectors must be inspected to diagnose a power liftgate issue.

How do you reset the back hatch on a Subaru Outback?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.