Why won t my Dodge Charger crank?

Possible Reasons Why a Dodge Charger Won’t Crank
When a Dodge Charger won’t crank, there could be several potential reasons for this issue. Here are some common factors that may cause a Dodge Charger to crank but not start:
1. Timing Belt or Tensioner Problem:
– The 3.5L Dodge Charger is known to have a common problem with the timing belt or tensioner. If the belt breaks, it can lead to a lack of fire to the engine, throwing it out of time and potentially causing damage to the engine.
2. Relay Slot Replacement:
– In some cases, replacing the relay slot #9 has resolved the issue of the car not starting, even with a new battery and starter.
3. Throttle System Issue:
– A clicking noise, inability to push the brake pedal, and the presence of a red lightning bolt on the dashboard could indicate a problem with the throttle system.
4. Engine Ground Wire Issue:
– A burned-off engine ground wire that is disconnected from the frame of the car can also prevent the Dodge Charger from cranking.
5. Ignition Switch Replacement:
– Replacing the ignition switch has been reported as a solution to starting problems in some instances.
It’s important to note that diagnosing and fixing these issues may require advanced skills and expertise. Consulting with qualified professionals is recommended if there are difficulties in starting the vehicle.
If none of these potential causes seem to align with the specific symptoms experienced with the Dodge Charger, it may be necessary to conduct a thorough diagnosis to pinpoint the exact issue.

How do I know if my starter is bad?

Signs of a Bad Starter

1. Whirring, grinding, or clicking sounds when trying to start your car.
2. A loud single click while trying to start the vehicle with no engine crank.
3. The instrument cluster, headlights, and radio work normally, but nothing happens when you turn the key.

Why is my Dodge Challenger not cranking?

The most common reasons a Dodge Challenger won’t start are a dead battery, an alternator problem, or failed starter.

Where is the starter fuse on a Dodge Charger?

So let’s start on it. Now. So we have that dodge charger that we’ll be demonstrating. On let’s explain now what we have here specifically. Guys you can see this is the fuse box that we have.

What’s the signs of a bad ignition switch?

Symptoms of a Failing Ignition Switch

• Key is hard or impossible to turn in the ignition.
• Engine won’t crank.
• Engine starts and stalls.
• Electrical issues or inoperative accessories.
• Stalling when driving.

How do you diagnose no crank no start?

This usually means the battery is bad and incapable of handling a huge request for power to crank the engine over. Headlights begin white and bright, when you try to start the engine, they dim to nothing or almost nothing then as soon as you let go of the key, the headlights QUICKLY bounce back to white and bright.

What are the signs of a dead starter?

Signs of a Bad Starter

• Whirring, grinding, or clicking sounds when trying to start your car.
• A loud single click while trying to start the vehicle with no engine crank.
• The instrument cluster, headlights, and radio work normally, but nothing happens when you turn the key.

Why wont my Dodge Charger start clicking noise?

Try checking the starter relay operation under the hood and see if it’s trying to engage and send power to the starter. If it is, check to see that the engine isn’t seized/hard to turn over, then look for a bad starter motor. Yellow/gray wire is the one that sends power to the starter motor solenoid to turn it on.

What will cause my car to turn over but not start?

The cranking continues, but the usual sound of the engine roaring to life doesn’t happen. If this happens to you, chances are it’s not the starter. Instead, it’s likely because your engine isn’t getting at least one of the four major components it needs to start: fuel, air, spark, or compression.

What fuses cause a crank no start?

In short, a fuel pump fuse is the quickest way to disable the vehicle from starting. Other vital fuses are coil packs and electrical control units. These fuses prevent the car from starting until they are back to their respective places.

Why does my starter click but not crank?

If you hear a clicking noise when you can’t start your car, it means the starter solenoid or relay contacts are operating, but the starter isn’t cranking the engine. Some of the common causes for this issue include dead batteries, faulty starters, loose or corroded battery terminals/cables, and more.