Why won t my chevy trax remote start?

Possible Reasons for Chevy Trax Remote Start Not Working
There could be several reasons why the remote start on your Chevy Trax is not working. Here are some common issues and possible solutions based on the search results:
1. Improper Starting Procedure: Ensure that you are following the correct starting procedure. Hit the lock button once, then hold the remote start button for at least 2 seconds or until the turn signal lamps flash.
2. Vehicle Not in Park: The remote start system will only work if the car is in Park. Disengage and re-engage the Park gear before retrying the starting procedure.
3. Too Many Remote Start Attempts: If you have used the remote starter twice in quick succession, it may not work. Insert the key in the ignition and turn it on and off before retrying the remote start.
4. Coolant and Oil Pressure: Double-check the engine’s coolant and oil pressure, as these can affect the remote start system.
5. Check Your Fob Battery: If your remote starter system isn’t working properly, try replacing the battery in your fob.
6. Key Fob Location: If your vehicle’s regular key fob is stored in the car, the remote start won’t work. Take the fob out of the vehicle and try using your remote start again.
7. Automatic Climate Controls: If the AC and heater only turn on with the remote start when you have automatic climate controls, not manual controls, this could be a factor to consider.
It’s important to check these factors to troubleshoot and resolve the issue with your Chevy Trax remote start.
If you’ve tried these steps and the issue persists, it may be beneficial to consult with a certified mechanic or contact the dealership for further assistance.
I hope this helps you get your remote start working again!

How do I reset my Chevy remote?

On the Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time until you hear the door lock and unlock again. This means you’re all set. Re-insert the programmed key back into the ignition to the “On” position to finish the Chevy key fob programming process.

Why is my Chevy Trax remote start not working?

Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.

How do I make my Chevy remote start work?

Here’s how it. Works. If you’re within 197 feet aim your key fob at the vehicle depending on your vehicle. You may or may not need to press the lock.

How to do remote start on chevy trax?

The key. And all I’m going to do is I’m going to hit the lock button twice. You’ll hear the car beep. Now I know the doors are locked.

Why would my remote start not work?

It likely means that there is something wrong with the remote start system or the transmitter, or the transmitter batteries are caput. Of course, it could be something as simple as a blown fuse, or as stupid as a transmitter and receiver system that must be synchronized, possibly after a battery change.

Why is my car remote not starting my car?

Check the battery: Make sure the battery in your smart key fob is not dead. If it is, replace the battery with a new one and try starting the car again. Check the signal: Make sure that the smart key fob is close enough to the vehicle to send a signal.

Why is my remote not working even with new batteries?

Generally, a remote is a non-repairable item. All you can do is replace the batteries, make sure they are installed correctly, and clean the battery contacts with a pencil eraser. If that doesn’t correct the problem the remote would need to be replaced.

Why is my car not recognizing my key fob?

The most common culprit behind an electric key fob’s failure is, as you might guess, the battery. This is a relatively easy issue to fix, although you may need to get a ride to get to buy a replacement fob battery.

How do you start a Chevy Trax with a key fob?

There you go it just locked. And I hold it down for about three seconds. And the car just started up the nice thing about it is it will run for about 10-15. Minutes.

Why is my Chevy remote start not working?

A dead battery, faulty starter, and an activated valet mode are some of the reasons why your remote start isn’t working. Aside from electrical issues, coolant and oil pressure problems can also affect the remote start’s operation. It costs between $250 and $400 to replace a damaged remote start fob.