AHG Auto Service » Make » Chevrolet » Why won t my chevy sonic start?

Why won t my chevy sonic start?

Reasons Why Your Chevy Sonic Won’t Start
If your Chevy Sonic won’t start, there could be several reasons behind this issue. Here are some common causes and potential solutions based on the search results:
1. Battery, Alternator, or Starter Issues: A dead or malfunctioning battery, alternator, or starter can prevent the car from starting. It’s important to check these components to diagnose the problem. [[4]]
2. Spark Plug and Ignition System: Malfunctioning spark plugs or loose plug connections on the ignition system can also prevent the engine from starting. If a spark plug has failed, it may need to be replaced in a workshop.
3. Key Fob Battery and Key Malfunctions: Dead key fob batteries or damaged/malfunctioning keys can also lead to starting issues. It’s essential to ensure that the key fob and key are functioning properly.
4. Camshaft and Crankshaft Timing: If the camshaft and crankshaft are not in sync, the engine may not start. Issues with the timing can prevent the spark plugs from firing at the right time.
5. Immobilizer and Security System: Problems with the immobilizer system or security features can cause starting issues, leading to the immobilizer light being on and preventing the car from starting.
6. Remote Start and Tach Reprogramming: Issues related to remote start installation and tach reprogramming may also affect the starting process.
7. Other Potential Causes: Other potential causes mentioned in the search results include rodent damage, corroded connections, and dirty/corroded ECM and starter connections. It’s important to inspect these areas as well.
It’s recommended to perform a thorough inspection and, if necessary, consult a professional mechanic to diagnose and address the specific issue causing the starting problem with your Chevy Sonic.

Why won’t my car start but I hear a clicking sound?

Usually a rapid clicking noise is a good indication that your starter motor isn’t getting enough electrical current to engage – basically your solenoid is trying to engage but can’t make the connection.

Why won’t my car start but I hear a click?

It’s likely that the cause of this noise is one of four common issues: a dead battery, loose wiring, a faulty starter motor, or an ignition switch. To find out which of these is causing the problem, you’ll need to check each component individually.

How do I force my ignition to turn?

While this probably means that the steering column lock has been engaged. And you won’t get to turn the steering wheel. It’s an anti-theft device. But don’t worry it’s easy to disengage.

Why does my 2014 Chevy Sonic click but wont start?

If you hear a clicking noise when you can’t start your car, it means the starter solenoid or relay contacts are operating, but the starter isn’t cranking the engine. Some of the common causes for this issue include dead batteries, faulty starters, loose or corroded battery terminals/cables, and more.

Why won t my chevy sonic ignition turn?

The most common reasons a Chevrolet Sonic key won’t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

How do I know if my Chevy Sonic has remote start?

Look for a remote-start button shaped like a curved arrow (on the physical key fob, this will be right below the lock and unlock buttons). If you see one then you have remote start capabilities, and if not, visit a “Chevy dealer near me“ to get it today!

How do you activate auto start?

Once started remotely the engine will run for 10 minutes and then shut. Off. You can extend the running time for another 10 minutes by repeating the start procedure during the initial. Period.

How do you start a Chevy Sonic automatic?

I’d like to demonstrate how to remote. Start you’re going to do is you’re going to hit the lock button twice. Once you hear the car physically beep like that you’re going to take this little u-shaped.

What is the code 68 on a Chevy Sonic?

A/C Clutch Relay circuit error (shorted to ground)
The ECM monitors the A/C compressor relay control circuit. If the control circuit is shorted to ground the ECM will set code 68 and the A/C compressor operation will be disabled.

Why is my ignition switch having power but wont start?

It could be a bad starter motor, a bad solenoid, a bad neutral safety switch, a bad ignition switch, or a broken wire in there somewhere. Before you start spending money, check to make sure you have in park or neutral first.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment