Why is the tyre pressure warning light flashing on my Toyota Yaris?

Possible Reasons for the Tire Pressure Warning Light Flashing on a Toyota Yaris
The tire pressure warning light flashing on a Toyota Yaris can indicate several potential issues. Here are some possible reasons based on the information available:
1. Low Tire Pressure or Sensor Malfunction: The flashing tire pressure light could indicate low tire pressure or a malfunction with one of the tire pressure sensors. This is a common cause for the warning light to illuminate.
2. TPMS Sensor Battery: The tire pressure sensors use a battery, and a flashing tire pressure light often indicates that the battery needs to be replaced. It can also mean there’s a problem with one of the sensors .
3. TPMS System Issue: If the TPMS light flashes for 60 to 90 seconds when the car is started and then stays on, it may indicate a problem with the TPMS system itself. In this case, it’s recommended to have the system serviced by a dealership or mechanic.
4. Consulting the Owner’s Manual: It’s advisable to consult the owner’s manual for the specific model of the Toyota Yaris to locate the tire pressure reset button or to find instructions on how to cancel the tire pressure warning light.
Resolving the Issue
To address the flashing tire pressure warning light on a Toyota Yaris, the following steps can be considered:
1. Check Tire Pressure: Start by checking the tire pressure in all four tires to ensure they are properly inflated. If any tire is significantly underinflated, it should be inflated to the recommended pressure.
2. Replace TPMS Sensor Battery: If the flashing light is due to a sensor battery issue, it may be necessary to replace the battery in the affected tire pressure sensor.
3. Consult a Professional: If the issue persists or if there are concerns about the TPMS system itself, it’s advisable to seek assistance from a qualified technician or visit a Toyota service center for diagnosis and resolution.
It’s important to address the flashing tire pressure warning light promptly to ensure the safety and proper functioning of the TPMS system in the vehicle.

Is it safe to drive with TYRE pressure warning?

Unless you have a completely flat tyre, yes you can continue to drive with the warning light on. But don’t leave it too long before you follow the checking procedure.

Why is my Toyota tire light flashing then solid?

If TPMS light flashing then solid, make sure to go professional tire shop and ask service person to check all tire sensors and the spare is working properly with correct inflation psi usually located inside driver side door flange.

Can I drive with a blinking tire pressure light?

If the pressure is low, inflate the tire to the optimal level. Drive for some time and check if the warning light is still flashing. If not, you’re good to go. If the light still flashes, take your car to the nearest mechanic and check your tires.

Is it safe to drive with TYRE pressure light on?

If the light has just turned on and you need to find your way to our shop or to an air pump, you should be fine. However, continuing to drive your car with the light on is not safe. Here’s why! When you drive your vehicle with low tire pressure, you are causing your tire to wear down excessively and prematurely.

Why is my tire pressure light on when my tires are fine Toyota?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

What is the tyre pressure warning on a Toyota Yaris?

Irrespective of the circumstances, if the TPMS warning light comes on you should pull into a safe area and visually check the tyres. If any appear to be deflated yet undamaged you should try to re-inflate them to the correct pressure and reset the TPMS (see subheading below).

Why is my tire pressure light blinking but my tires are fine?

The flashing light can mean the sensor is damaged, missing, or has a dead battery and needs to be replaced. It can also mean that an incorrect sensor is installed in the tire. To make sure you service the TPMS systems properly, you need to troubleshoot these potential issues until you find the culprit.

How do I manually reset my TPMS sensor?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Where is the TPMS reset button on a Toyota Yaris?

And the light will flash. One. Two three sorry put the ignition. On which brings the lights.

How do I stop my tire pressure light from blinking?

Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically found under the steering wheel.