Why is the tire pressure light blinking on my Chevy Trax?

Understanding the Tire Pressure Light on Your Chevy Trax
The tire pressure light in your Chevy Trax serves as a crucial safety feature, alerting you when one or more tires are significantly under-inflated, which can create unsafe driving conditions. There are several reasons why the tire pressure light might be blinking:
Possible Causes:
1. Low Tire Pressure: The most common reason for the blinking tire pressure light is low air pressure in one or more tires. This can be due to a leak or natural loss of pressure over time.
2. TPMS Sensor Malfunction: If the battery in a pressure sensor has depleted, the TPMS warning light may illuminate. Additionally, a malfunction in the TPMS receiver module or a damaged pressure sensor can also trigger the warning light.
3. Resetting the TPMS: In some cases, driving for at least 10 minutes at over 30mph can warm up the car and reset the TPMS warning light. Alternatively, you can try manually resetting the TPMS warning light to disable the alert.
Addressing the Issue
To address the blinking tire pressure light, it’s important to first check the tire pressure in all four tires using a reliable tire pressure gauge. If any tire is found to have significantly low pressure, it should be inflated to the recommended level. If the tire pressure is nominal and there are no leaks, attempting to reset the TPMS warning light may resolve the issue.
If you’re unsure about the specific cause of the blinking tire pressure light, it’s advisable to seek assistance from a qualified mechanic or visit a service center equipped with the necessary diagnostic tools to accurately diagnose and address the issue.
Remember, maintaining proper tire pressure is essential for safe and efficient driving, so addressing the blinking tire pressure light promptly is crucial for your safety and the longevity of your Chevy Trax.

How much does it cost to replace a TPMS battery?

The cost of replacing a TPMS sensor battery varies depending on the make and model of your vehicle, but generally speaking you should expect to pay anywhere from $20-$200 for each replacement battery, plus labor costs if you have it done at an auto repair shop or dealership.

How do you reset the tire pressure sensor on a Chevy Trax?

And we are going to use the cursor to scroll up. So it selects yes last thing we’re going to do is press that set and clear button one more time. And now you can hear that the horn chirp twice.

Can you drive with TPMS light flashing?

You will not be able to see this damage, which can increase over time. This is why you should maintain proper inflation pressure and try to avoid driving when the TPMS light is on.

What should tire pressure be for Chevy Trax?

35 PSI
Most Chevy passenger vehicles have a recommended tire pressure of 35 PSI.

What does a blinking tire symbol mean?

If your tires are under- or over-inflated, the TPMS activates a warning light on your dashboard. When the light is steady, it means you need to have your tire pressure checked. When the light is flashing, it means you need to have your TPMS checked.

Where is the tire light reset button?

You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it. Inflate all tires, including the spare tire, to 3 PSI over their recommended amount, then deflate them completely.

Where is TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Why is my tire pressure light blinking when my tires are fine?

The flashing light can mean the sensor is damaged, missing, or has a dead battery and needs to be replaced. It can also mean that an incorrect sensor is installed in the tire. To make sure you service the TPMS systems properly, you need to troubleshoot these potential issues until you find the culprit.

Why is the tire pressure light flashing on my Chevy Trax?

What Does a Flashing Tire Pressure Light Mean? Tire pressure sensors often use a battery, and a flashing tire pressure light can often be a sign that the battery needs to be replaced. This could also be because of an issue with your vehicle’s sensor.

Where is the TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.