AHG Auto Service » Make » Dodge » Why is the cruise control not working on my Dodge Avenger?

Why is the cruise control not working on my Dodge Avenger?

Possible Reasons for Cruise Control Not Working on Dodge Avenger
The cruise control on a Dodge Avenger may stop working due to several reasons. These can include:
1. Blown Fuse or Defective Brake Pedal Switch: The most common reason for a cruise control to stop working is due to a blown fuse or a defective brake pedal switch.
2. Issues with Throttle Control System or ABS: Problems with the throttle control system or the ABS can also cause the cruise control to malfunction.
3. Broken Vacuum Line (in older cruise control systems): In older cruise control systems, a broken vacuum line can cause the cruise control to stop working.
4. Faulty Cruise Control Switch: A faulty cruise control switch can also lead to the cruise control not working.
5. Broken Mounts for the Circuit Board: In some cases, broken mounts for the circuit board that the on/off button for the cruise control makes contact with can cause the cruise control to malfunction.
6. Intermittent Issues: Some users have reported intermittent issues with the cruise control, such as it not turning on for the first 10 minutes after engine start on a cold engine.
Potential Solutions
If you are experiencing issues with your cruise control, here are some potential solutions based on user experiences:
– Check the Cruise Control Switch: Consider checking the cruise control switch for any faults and, if necessary, replacing it with a new one.
– Inspect the Circuit Board: If the mounts for the circuit board are broken, a temporary fix involves placing a small piece of paper behind the board to keep it pushed to the end of the lever.
– Check for Corroded Connectors: In some cases, cleaning corroded connectors in the cruise control switch assembly has resolved the issue for users.
– Consider Professional Diagnosis: If the issue persists, it may be advisable to have a mechanic or professional diagnose the problem to determine the exact nature of the issue.
It’s important to note that these are potential solutions based on user experiences, and it’s always recommended to consult with a qualified mechanic or technician for a proper diagnosis and resolution of the cruise control issue.
I hope this information helps you troubleshoot and resolve the cruise control issue with your Dodge Avenger!

How do you use cruise control on a Dodge Avenger?

Hour with just a touch. This convenient feature allows you to increase your cruise control speed. Without ever having to take your hands off the wheel.

What happens if cruise control fails?

Generally, when a car cruise control malfunctions it simply turns off. The driver then just has to turn off the cruise control button and take control of the car. If the cruise control does not turn off when you apply the brake, manually turn the feature off and drive normally.

What module controls cruise control?

The E-Cruise Module is the proverbial “brain” of the entire system and with the assistance of the included accelerator pedal interface harness, intercepts the communication between the pedal position sensor and the vehicle’ Electronic Control Unit (ECU).

Can you reset your cruise control?

To determine if you have a problem, try resetting the system. To do this, turn the cruise control off by disengaging the switch in your car. Next, turn the system on again, set a speed, and reapply cruise control.

Why would my cruise control suddenly stopped working?

Since your car’s cruise control is part of an electrical system, it needs a fuse to function properly. A short circuit in this system can cause a fuse to blow, which means that the cruise control will suddenly stop working. Fortunately, replacing a blown fuse is a cheap and easy repair for any auto mechanic.

What is the most common failure of a cruise control system?

Examine the vacuum lines to ensure that they are intact and not leaking. The photo at the beginning of the article shows the most common failure of cruise control systems, vacuum hoses that are leaking or deteriorated to the point they will not stay attached to the cruise control servo.

How much does it cost to fix cruise control?

The average cost for a Cruise Control Module Replacement is between $623 and $636. Labor costs are estimated between $50 and $63 while parts are typically priced around $574. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How do I get cruise control to work?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Is there a reset for cruise control?

If you notice that your speed fluctuates after setting it, your system may be malfunctioning. To determine if you have a problem, try resetting the system. To do this, turn the cruise control off by disengaging the switch in your car. Next, turn the system on again, set a speed, and reapply cruise control.

What are the symptoms of a bad cruise control switch?

Symptoms of a Bad Cruise Control Switch

  • Cruise Control Stops Suddenly.
  • The Switch Does Not Turn On or Off.
  • A Blown Fuse.
  • A Faulty Brake Pedal Switch.
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment