AHG Auto Service » Make » Dodge » Why is the cooling fan not working in my Dodge Durango?

Why is the cooling fan not working in my Dodge Durango?

Possible Causes of Cooling Fan Not Working in Dodge Durango
There can be several reasons why the cooling fan is not working in a Dodge Durango. Here are some possible causes based on the search results:
1. Short in the signal wire: One user mentioned that they had a short in the signal wire, and wiggling the wire caused the fan to come on.
2. Faulty fan clutch: The springs in the fan clutch can wear out over time, preventing the fan from functioning properly.
3. Low coolant level: If the coolant level is not high enough to keep pressure in the engine, the temperature sensor may not detect the need for the fan to kick on.
4. Bad engine temperature sensor: If the engine temperature sensor is faulty, it may not send the signal to the radiator fan to turn on.
5. Blown fuse: A blown fuse can cause the cooling fan to stop working. It is recommended to check the fuse related to the cooling fan.
6. Bad relay: A faulty relay can also prevent the cooling fan from working. It is advisable to have the relay checked and replaced if necessary.
7. Defective blower motor: If the blower motor is faulty, it can cause the air conditioning system to malfunction, resulting in the fan not working.
It is important to note that these are just possible causes based on the search results. To accurately diagnose and fix the issue, it is recommended to consult a qualified mechanic or refer to the Dodge Durango’s user manual for troubleshooting steps specific to the vehicle model.
I hope this information helps! Let me know if you have any other questions.

Why did my car cooling fan stop working?

The most common reasons for a radiator fan not working can be a blown-out fuse, a bad relay, or a broken wire. The faulty coolant temp sensor might also be a reason behind it.

Will AC work without radiator fan?

The same way your radiator needs airflow to cool the coolant, your condenser needs airflow to cool the freon that makes cold air. That fan is where the air flow is coming from, until you get up to speed. A broken fan may not seem like much, but it can cause overheating and of course your ac not to work at lower speeds.

How do I know if my radiator fan fuse is blown?

You might see a temperature light pop up on your dashboard. In this case stop driving immediately. And turn off your car. The fifth symptom is a blown cooling fan fuse.

Is there a fuse for a cooling fan?

So just want to price each of them and lift up to unlock them. Okay and on the back side of the cover. You will also have a small fuse diagram.

Can I drive with a broken cooling fan?

Can I Drive My Car If The Fan Is Not Working? Yes, your car can still run without a radiator fan, but you never should. Your vehicle’s cooling system is crucial to the engine’s performance and lifespan. Every time your engine overheats, you’re causing tremendous damage to the precious engine.

Why is my cooling fan not kicking in?

It could be a problem with the fan motor, temperature sensor, fan control relay, or wiring. The Check Engine Light might come on. With modern cars, a DTC will be triggered that illuminates the light on the dash when it exceeds normal operating temperatures. It might be accompanied by a message on the cluster too.

What sensor turns on the radiator fan?

Yes, the coolant temperature sensor is an important component in controlling the radiator fan in many modern vehicles. The coolant temperature sensor monitors the temperature of the engine coolant and sends this information to the engine control module (ECM), which uses it to determine when to turn on the radiator fan.

Can a bad thermostat cause radiator fan not to work?

Solution: While the thermostat is not strictly a part of the radiator fan system, a bad one can definitely cause problems for your cooling system. Depending on the symptoms your car is displaying, your mechanic may want to check the thermostat and rule it in or out as a cause.

Should radiator fan turn on when AC is on?

First, run the AC and see if the radiator fan runs: it’s supposed to run with the AC by default. If it doesn’t run, you likely have a low level of refrigerant in the system or a faulty switch or a sensor, or a bad fan motor, fuse, relay, or a wiring problem.

Can you drive with a cooling fan not working?

Absolutely not!
Driving for any prolonged period without an operating radiator fan is very likely to overheat your engine and result in an extremely expensive engine repair bill.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment