Possible Reasons for Subaru Traction Control Light Being On
The traction control light in a Subaru can come on for various reasons, and it’s important to address the underlying issue to ensure the vehicle’s safety and performance.
1. Traction Control System Intervention:
– The traction control system (TCS) may illuminate the warning light when it detects a loss of traction, such as in snowy or rainy weather. This is a normal operation of the system to maintain traction.
2. Malfunctioning Traction Control System:
– If the traction control light stays on, it could indicate a malfunction in the system. This may require attention from a dealership or a mechanic to diagnose and rectify the issue.
3. Check Engine Light Related Issues:
– The traction control light may be related to the check engine light. In some cases, Subaru disables the cruise control and flashes the traction control light to draw attention to the check engine light being on. It’s important to pull the codes and address any underlying problems to restore normal operation.
4. Specific Vehicle Issues:
– Specific issues reported by Subaru owners include the traction control light being on along with the check engine light and blinking cruise control light. These instances may require diagnostic testing to identify the root cause, such as a faulty valve body or a sensor near the gas tank.
5. Steering Angle Sensor Replacement:
– In some cases, the traction control off light may be related to the steering angle sensor needing replacement. This issue was reported in a Subaru Outback, and addressing it may be beneficial for the proper functioning of the vehicle.
It’s important to note that the traction control light being on could indicate various underlying issues, and it’s advisable to have the vehicle inspected by a qualified mechanic or dealership to diagnose and address the specific cause.
Contents
- Why won’t my traction control light go off?
- Why wont my traction light go off?
- Can worn brake pads cause traction control light to come on?
- How do I fix the traction control warning light?
- Why won’t my traction control light turn off in my Subaru?
- Is it OK to drive with traction control light on?
- How do you reset traction control on a Subaru?
- What happens when your traction control light stays on?
- How much does it cost to repair traction control system?
- What can cause traction control light to come on?
Why won’t my traction control light go off?
If the traction control light won’t turn off, there can be some reasons. One reason could be that the fuse for the traction control system has blown. Or it could be that there is a problem with the traction control sensors causing the light to stay on.
Why wont my traction light go off?
If the traction control light won’t turn off, there can be some reasons. One reason could be that the fuse for the traction control system has blown. Or it could be that there is a problem with the traction control sensors causing the light to stay on.
Can worn brake pads cause traction control light to come on?
Another common cause of the electronic stability control light is a malfunction in the anti-lock brake system. This can be caused by various things, such as low brake fluid, worn-out brake pads, or a problem with the sensor.
How do I fix the traction control warning light?
Press the gas pedal 3 times in quick succession. Then, turn your engine on all the way and let it run for a minute. The TCS and ABS lights should reset and go away if there isn’t any underlying problem with your traction control system.
Why won’t my traction control light turn off in my Subaru?
Sometimes software glitches cause the traction system to indicate fault. This could be caused by among other things, malfunctioning sensor lights. Sometimes simply shutting the engine off and turning it on again can help to clear such errors. If the warning light stays on, it might be time to try out something else.
Is it OK to drive with traction control light on?
While your car is typically safe to drive with the traction control light on, you should not drive it under certain conditions. If the traction control light, anti-lock braking system light, and red brake-warning light illuminate, your entire braking system may be affected.
How do you reset traction control on a Subaru?
Turn Traction Control On and Off
In such cases, turning traction control on and off may be enough to solve the problem. If your Subaru model has a separate VSC button, you can also try to re-engage the system by holding the button down.
What happens when your traction control light stays on?
If the traction control light illuminates and stays lit without blinking, this means that the traction control system has been deactivated, and there is no traction control available.
How much does it cost to repair traction control system?
The average cost for a Traction Control Switch Replacement is between $101 and $111. Labor costs are estimated between $39 and $49 while parts are typically priced around $62. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What can cause traction control light to come on?
Top Reasons Your Traction Control Light Came On
- The Anti-Lock Braking System Is Malfunctioning.
- Wheel Speed Sensors Are Damaged.
- Steering Angle Sensor Problems.
- General Road Conditions Are Poor.
