Why is my Subaru not connecting to Android Auto?

Troubleshooting Android Auto Connection with Subaru
If your Subaru is not connecting to Android Auto, there are several potential reasons for this issue. Here are some common troubleshooting steps and factors to consider:
1. USB Cable Quality:
– Using a high-quality USB cable is crucial for a successful connection with Android Auto. Many inexpensive USB cables are designed only for charging and may not support data transfer effectively.
– It’s recommended to try several different cables, and if necessary, clean out the USB-C connector with a plastic toothpick to remove any lint that may be causing connection issues.
2. Phone Compatibility and Settings:
– Ensure that your phone’s firmware and all apps, including Android Auto, are fully up to date.
– Check if your phone is compatible with Android Auto and that it meets the necessary requirements, such as running Android 8.0 (Oreo) or later.
– Consider enabling USB debugging and setting the USB to debugging mode in the developer options of your phone, as this has resolved connection issues for some users.
3. Software Updates:
– Both your phone and your Subaru’s infotainment system may require software updates to ensure compatibility and proper functioning with Android Auto.
4. Vehicle and Phone Compatibility:
– Verify that your Subaru model is equipped with Android Auto and that it is compatible with your specific phone model.
5. Connection Issues:
– If Android Auto fails to load or connect, consider restarting your phone and trying different USB ports in the vehicle.
– It’s also advisable to unplug your phone from the car and restart the phone to see if it resolves the connection issue.
6. Check for App Issues:
– If Android Auto had previously worked but is now not connecting, consider replacing the USB cable as it may be the cause of the issue.
7. Professional Assistance:
– If the issue persists after attempting these troubleshooting steps, it may be beneficial to seek assistance from a Subaru dealership to diagnose and resolve the connection problem.
By considering these factors and following the troubleshooting steps, you can work towards resolving the issue of your Subaru not connecting to Android Auto.

What is going on with Android Auto?

Google discontinued Android Auto for phones to focus entirely on Google Maps. However, the driving mode wasn’t received very well, with users criticizing the lack of features and the exclusive Google Maps integration (which blocked them from using other navigation apps).

How do I enable Android Auto on my Subaru?

As of 2022. Our wired so you will need a usb-c cable. Or whatever you use to connect and charge your Android. Phone.

How do I reset my Subaru infotainment system?

I hit reset the car is now resetting itself back to factory. As if you never owned. It. Thank you for listening. If you ever need any assistance feel free to reach out to us here at superfill.

How do I connect my Android to my Subaru Bluetooth?

Make sure Bluetooth is activated on your mobile device. On your STARLINK multimedia screen, click Setup > Bluetooth > Add. The screen will now display the name and PIN for the STARLINK system, which is now discoverable. On your mobile device, select your Subaru STARLINK system in the Bluetooth menu.

Why has Android Auto stopped connecting to my car?

You may be using a car or smartphone that’s not Android Auto compatible. You may have software issues, including an outdated Android operating system or Android Auto app. You may have a bad wired or wireless connection. You may be using a faulty app.

How do I Reset my Bluetooth on my Android?

How to reset Bluetooth settings

1. 1 Navigate to and tap Settings.
2. 2 Tap Connections.
3. 3 Tap the Bluetooth switch to turn it off.
4. 4 Wait a few seconds and tap the switch again to turn the Bluetooth back on.

How do I get my Android Auto to work in my Subaru?

Connect your Android device to your Subaru with a USB cable. The USB port is located just below the infotainment screen. On your Subaru infotainment screen, a prompt will appear to enable Android Auto. Click Yes to allow permissions.

How do I reset my Android Auto in my car?

Below are the steps that you need to follow to reset the Android Auto app.

1. Open the settings app on your Android phone.
2. Go to Apps or Advanced Features.
3. Find Android Auto App and click on it.
4. Click on storage and cache.
5. Now click on ‘Clear Storage’.
6. Also, clear the cache.

Why is my phone not connecting to my Subaru?

Ensure your phone’s Bluetooth functionality is enabled, and try restarting it or disconnecting and reconnecting. Not all smartphones or devices are compatible with your Subaru’s Bluetooth system. Verify that your device is on the list of supported models. Your Subaru may have a limited number of paired devices.

How do I reset my Subaru Bluetooth?

Click on settings on the very first tab here the general tab. You would scroll all the way down. And you click on factory data reset it will ask you to confirm. You click reset.