AHG Auto Service » Make » Subaru » Why is my Subaru Legacy not cranking?

Why is my Subaru Legacy not cranking?

Reasons for a Subaru Legacy Not Cranking
If your Subaru Legacy is not cranking, there could be several reasons for this issue. Here are some common causes based on the information from the search results:
1. Battery Trouble: An engine that cranks but doesn’t start may have battery issues. This could be due to a drained battery, nearing the end of its lifespan, or corrosion on the battery terminals.
2. Weak Starter Motor: A weak starter motor could also be a reason for the cranking issue.
3. Fuel Delivery Problems: If the car turns over but doesn’t start, it could be related to fuel delivery issues, such as a clogged fuel filter or a faulty fuel pump.
4. Electrical System Faults: Any fault in the electrical system, including a bad alternator, could also cause the vehicle not to start.
5. Temperature Sensitivity: Some users have reported that their Subaru Legacy starts when cold or hot but not when warm, indicating a potential temperature-related issue.
6. Other Potential Causes: Other potential causes mentioned in the search results include issues with the crank sensor, camshaft sensor, and ECM (Engine Control Module),,,.
It’s important to note that diagnosing the specific cause of the cranking issue may require professional assistance, especially for complex electrical or sensor-related problems.
If you’re experiencing this issue, it’s advisable to have the vehicle inspected by a qualified technician who can accurately diagnose the problem based on the specific symptoms and perform the necessary repairs.
I hope this information helps you understand some of the potential reasons why your Subaru Legacy may not be cranking. If you need further assistance, feel free to ask!

What does it mean when your car won t start but the lights come on?

If your car won’t start but the lights come on, it is likely not an issue with your battery so it’s time to turn your attention to your ignition switch. A failed ignition switch won’t be able to supply power to the starter motor, ignition system, and other engine controls, preventing the engine from starting.

Why is my car on but not turning over?

Common symptoms
Turning your key turns your battery on, so if you’ve turned your key all the way and the lights come on, but the engine doesn’t turn over, your starter motor could be the culprit. Any signs of electrical failure could also indicate the starter motor needs help.

How do I know if my Subaru starter is bad?

Unusual grinding or whirring noises when starting your Subaru can be indicative of a faulty starter. These sounds may occur as a result of worn-out gears or a malfunctioning starter solenoid.

Why is my Subaru not turning over?

A dead or weak battery is one of the most common reasons why a Subaru car may not start. If the battery is discharged or unable to hold a charge, it will not provide the necessary power to start the engine.

Why is my engine not trying to turn over?

If you attempt to start up your car but the engine won’t turn over and the dashboard lights up, then you most likely have an issue with your battery. You could have a damaged or corroded battery terminal, which is stopping the engine from starting up when you fully turn the key.

Why is my 2006 Subaru Legacy not starting?

The most common reasons a 2006 Subaru Legacy won’t start are a dead battery, an alternator problem, or failed starter.

Why is my Subaru turning on but not starting?

An engine that cranks, but doesn’t start, may have battery issues. There’s a possibility that the battery doesn’t have enough power, either because it’s been drained or because it’s nearing the end of its lifespan. There could also be corrosion on the battery terminals.

What can be mistaken for a bad starter?

Engine Won’t Crank or Start
The most obvious sign of a bad starter is an engine that won’t crank or start. Of course, there are many other issues besides a bad starter that can prevent the engine from cranking. A few examples include a bad battery, failed ignition switch, or an engine mechanical problem.

What do I do if my car wont start but everything else works?

What to Do If Your Car Won’t Start

  1. If the Car Clicks When Trying to Start. Try Cycling the Key. Try Tapping on the Battery Terminals. Try Tapping the Starter.
  2. If There’s No Click When You Turn the Key. Try Shifting the Shifter.
  3. If the Engine Cranks But Won’t Fire Up. Try Swapping Relays. Try Smacking the Fuel Tank.

Why is my car suddenly not starting?

It could be a minor glitch in the battery terminals, a dead battery, a defective ignition switch and so on. Car starting problems are mainly related to the battery, car self-start system or fuel lines. Below are some of the common reasons why your car is not starting upon switching on the ignition.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment