Troubleshooting a Subaru Key That Won’t Turn
If your Subaru key is not turning in the ignition, there are several potential reasons for this issue. Here are some common causes and troubleshooting tips based on the information from various Subaru owners and experts:
1. Steering Wheel Lock:
– The steering wheel lock feature on modern cars is designed as an anti-theft measure. If the steering wheel is locked, it can prevent the key from turning in the ignition. To address this, try gently moving the steering wheel back and forth while attempting to turn the key. This can help release the pressure on the steering wheel lock and allow the key to turn.
2. Ignition Cylinder Issues:
– If the key won’t turn and the steering wheel is not locked, the issue might be related to the ignition cylinder. Over time, the ignition cylinder may wear out, especially if heavy keychains are used. In such cases, trying a spare key or having a new key cut may help resolve the issue.
3. Malfunctioning Solenoid or Gear Shifter:
– In some instances, a malfunctioning solenoid or gear shifter can cause the key not to turn in the ignition. If the issue persists despite other troubleshooting attempts, it may be necessary to have these components inspected and potentially replaced by a qualified technician.
4. Stuck Pins or Springs in the Key Cylinder:
– Another potential cause for a key not turning in the ignition is stuck pins or springs inside the key cylinder. Gently tapping the key ignition with a small tack hammer can help loosen any stuck pins or springs. However, it’s important to use minimal force and seek professional assistance if the issue persists.
It’s important to note that forcing the key to turn should be avoided, as this can potentially cause damage to the ignition system. If the troubleshooting tips mentioned above do not resolve the issue, it’s advisable to consult a qualified mechanic or Subaru dealership for further diagnosis and repairs.
Remember, it’s always best to address issues with the ignition system promptly to ensure the continued reliability and safety of your vehicle.
Contents
- What would cause a key not to turn in the ignition?
- What’s the signs of a bad ignition switch?
- How do you release a Subaru steering wheel lock?
- How do you unlock the ignition on a Subaru?
- How do I reset my Subaru key?
- How do you disengage a steering lock?
- How do you unlock a stuck ignition?
- Why is my Subaru wheel locked?
- Why can’t i turn my key in my subaru?
- What to do if car key is not rotating?
What would cause a key not to turn in the ignition?
Wear and tear may also cause the key to get stuck. Years of abusing your key may cause it not to function properly. If your ignition lock cylinder is about to fail, this may also cause you not to be able to take out your key. Misaligned springs and pins can make it difficult to remove or insert the key.
What’s the signs of a bad ignition switch?
Symptoms of a Failing Ignition Switch
- Key is hard or impossible to turn in the ignition.
- Engine won’t crank.
- Engine starts and stalls.
- Electrical issues or inoperative accessories.
- Stalling when driving.
How do you release a Subaru steering wheel lock?
And can’t start the ignition. Give it up. Never get in your car. Notice that the steering wheel is blocked.
How do you unlock the ignition on a Subaru?
The Ignition Cylinder Is Locked
This security feature is easy to accidentally activate, and it’s just as easy to turn off. Gently move the wheel while you continue to turn the key. As you combine these two motions, the wheel and ignition cylinder should unlock.
How do I reset my Subaru key?
Open the driver’s side door, use the door button control to unlock all doors, then close the driver’s side door. Put your key in the ignition. Turn the key so the electrical systems turn on but not the engine, then turn it back to the off position. You must do this quickly ten times in a row.
How do you disengage a steering lock?
There’s a dead bolt in the steering column. And a rack and pinion gear. That actually causes that dead bolt to engage. And disengage to lock the steering.
How do you unlock a stuck ignition?
As you step on the brakes jiggle. The key hundreds of times from the off position to the ignition. Position. If you’re lucky it might just appear out of nowhere. Read.
Why is my Subaru wheel locked?
All you have to do slightly. Turn the steering wheel has a little bit of give and then turn and look freedom sweet sweet freedom good to go.
Why can’t i turn my key in my subaru?
The most common reasons a Subaru Outback key won’t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.
What to do if car key is not rotating?
To help them keep their locks. Working. Good if you like videos like this and want to see more go ahead and hit that like button it really helps us know what videos to make in the future.
