Why is my Subaru Crosstrek not blowing air?

Possible Reasons for Subaru Crosstrek Not Blowing Air
If your Subaru Crosstrek is not blowing air, there could be several reasons for this issue. Here are some potential causes based on the information from various sources:
1. Failed Blower Motor: The blower motor is a central component of the air conditioning system in the Subaru Crosstrek. If the blower motor stops working due to a fault, the air will not flow out of the vents when you switch on the AC in your Crosstrek. Signs of a failing blower motor include unusual whirring noises, weak or inconsistent airflow, and in rare cases, a burning plastic odor or smoke coming from the AC vents, especially when the fan speed is set to high.
2. Cabin Air Filter and Fuses: It’s recommended to start by replacing the cabin air filter and checking the fuses, as these are relatively easy fixes. If these do not solve the problem, it’s advisable to bring your Subaru to an authorized service center for diagnosis.
3. HVAC System Hose: The issue could also be related to a broken HVAC system hose, which may require more attention than a simple blockage.
4. Resistor and Relay Issues: There have been reports of the blower working on low and medium speeds but not on high, even after replacing the blower motor resistor and relay with new parts. This suggests that there may be issues with the resistor and relay.
5. Refrigerant Leak: Another potential cause for the AC not blowing cold air in the Subaru Crosstrek could be a refrigerant leak. Low or overcharged refrigerant, compressor malfunction, clogged cabin air filter, dirty condenser or evaporator coils, and a bad fuse or relay are also listed as common causes for the AC not cooling properly.
6. Other Potential Causes: Less common causes for the AC not cooling properly include a clogged expansion valve or orifice tube, overcharged oil, faulty blend door actuator, or a defect in the climate control unit.
It’s important to note that these are potential causes based on the information provided. For a more accurate diagnosis and resolution of the issue, it’s advisable to bring your Subaru Crosstrek to an authorized service center for professional evaluation and repair.
If you have any further questions or need additional assistance, feel free to ask!

Why is my car AC suddenly not blowing?

Your car’s AC stopped working most likely because of a freon leak or a bad compressor. Though these causes are the simple to spot reasons for your AC not working inside your car, it might be anything as simple as a dirty cabin filter or a bad belt.

Why is the heater fan not working in my Subaru Crosstrek?

The most common reasons a Subaru Crosstrek heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.

Why is my car AC running but not blowing air?

The blower motor is responsible for pushing air through the vents inside your car. So if you have absolutely no airflow coming through your vents, it’s possible that your blower motor or the resistor that controls its speed has failed.

Why is my AC turning on but nothing blows out?

The most common problems that cause a lack of airflow include frozen coils, broken fan and restricted airflow due to dirty air filters or vent obstruction. However, there are many other issues that can lead to minimal airflow, so it may be necessary to ask the professionals.

Why is my Subaru not blowing hot air?

One of the most common reasons for a Subaru car heater blowing cold air is a faulty thermostat. The thermostat controls the flow of coolant through the engine and regulates the temperature. When the thermostat fails, it can get stuck in the open position, causing the engine to run cooler than normal.

Why is my AC not working in my Subaru?

The first possibility is that there is a refrigerant leak. The leak may be found in the evaporator, condenser or hose in which case you should bring your car to a mechanic to be repaired. Another reason that your air conditioner may not be blowing cool air is because the compressor has gone bad.

How do you reset a blower motor?

Allow the blower to cool down, so that any metal components are safe to touch. Once the blower is cool, locate the reset button, which is usually red and located on the backside of the motor. If the reset button has popped, push it back in.

Why is my heater on but fan not blowing?

If you notice that the blower fan is not spinning, it could indicate a furnace blower motor failure. There are several possible causes for this issue, including a blower wheel obstruction, faulty motor capacitor, improper voltage supply, or worn-out blower bearings.

Why is my blower motor not working on any speed?

The most common reason why your blower motor won’t work on any speed is that you have a bad or blown a fuse. A fuse is a small wire inside of a connector that is used to protect the motor itself from a surge of electricity.

Why is my blower not blowing?

There are several possible causes for this issue, including a blower wheel obstruction, faulty motor capacitor, improper voltage supply, or worn-out blower bearings. A blower wheel obstruction can prevent the fan from spinning freely, while a faulty motor capacitor may result in insufficient power to start the motor.