Why is my remote start not working Chevy Malibu?

Possible Causes for Remote Start Not Working on Chevy Malibu
Based on the search results, there are several possible causes for your remote start not working on your Chevy Malibu. Here are some factors to consider:
1. Improper Starting Procedure: Make sure you are following the correct starting procedure for your remote start system. Press the lock button once, then hold the remote start button (usually shaped like an arrow) for at least 2 seconds or until the turn signal lamps flash .
2. Vehicle Not in Park: The remote start system will only work if the car is in Park. Make sure the transmission is in Park (P) before attempting to use the remote start .
3. Too Many Remote Start Attempts: If you have used the remote starter twice in quick succession, it may not work. In this case, insert the key in the ignition, turn it on and off, and then try the remote start again.
4. Coolant and Oil Pressure: The remote engine start system on the Chevy Malibu will prevent starting or stop the engine if running when certain conditions are met, such as the coolant temperature getting too high or the oil pressure getting low.
5. Battery Issues: Check the battery in your key fob. If the battery is dead or low, it may prevent the remote start from working. The size of the battery for the key fob in the Malibu is a CR2032 battery.
6. Electrical Issues: There could be electrical issues such as a bad relay in the electronics, loose fuse, or loose wire that are causing the remote start problem. These issues may require further inspection and troubleshooting by a professional.
It’s important to note that these are just possible causes and further diagnosis may be needed to pinpoint the exact issue with your remote start system. If you are unable to resolve the problem on your own, it is recommended to consult a qualified technician or contact your local Chevrolet dealership for assistance.
I hope this information helps! Let me know if you have any other questions.

How do I program my Chevy remote start key fob?

Simultaneously press and hold the lock and unlock buttons on your key fob until you hear the doors lock and unlock again. This indicates that your fob is programmed successfully. To complete the process, reinsert your newly programmed key into the ignition and turn it to the “On” position.

Why would remote start stopped working?

Most times, the only reason your remote control loses programming is because you have a dead battery. Car remote starts can keep programming through some type of memory installed in its features. However, like any computer, sometimes they lose memory. When this happens, the only way to fix it is by calling Auto Image.

How do I reset my remote starter?

Insert your ignition key and turn it to Accessory (or press the start button once without pushing the brake pedal). Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again).

Why is my Chevy remote start not working?

A dead battery, faulty starter, and an activated valet mode are some of the reasons why your remote start isn’t working. Aside from electrical issues, coolant and oil pressure problems can also affect the remote start’s operation. It costs between $250 and $400 to replace a damaged remote start fob.

How do I reset my Chevy Malibu?

Button. Step four scroll down until you’re at the oil life. Screen step 5. Press the right arrow button and then select the reset. Option step 6. Select yes to confirm the oil life reset.

How do I make my Chevy remote start work?

Here’s how it. Works. If you’re within 197 feet aim your key fob at the vehicle depending on your vehicle. You may or may not need to press the lock.

How do I get my remote start to work?

Feet if unobstructed. And somewhat less if buildings or other objects are between the remote and the vehicle. To use the system. First press the lock button on the remote.

Why is my remote start not working and Check Engine Light on?

If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap! Reseal the cap, restart the car, and retry step #1!

How do I reset my Chevy Malibu remote?

Hold the “Lock” and “Unlock” buttons on your Chevy key fob. Listen for the sound of the door locks engaging and disengaging again. This means you have completed the programming. Put your key back into the ignition, turn to the “On” position, and this will end the programming settings.

Why is my car remote not starting my car?

Check the battery: Make sure the battery in your smart key fob is not dead. If it is, replace the battery with a new one and try starting the car again. Check the signal: Make sure that the smart key fob is close enough to the vehicle to send a signal.