AHG Auto Service » Make » Toyota » Why is my radiator fan not working Toyota?

Why is my radiator fan not working Toyota?

Possible Causes of a Radiator Fan Not Working in a Toyota
When the radiator fan in your Toyota is not working, it can lead to potential damage to your engine and overheating issues. There are several possible causes for a malfunctioning radiator fan. Here are some common reasons:
1. Blown fuse: A blown fuse can cause the radiator fan to stop working. Checking the fuse box and replacing any blown fuses can resolve this issue.
2. Bad relay: A faulty relay can also prevent the radiator fan from functioning properly. Replacing the relay may be necessary to fix the problem.
3. Broken wire: A broken wire in the radiator fan circuit can disrupt the electrical connection and prevent the fan from working. Inspecting the wiring and repairing any damaged wires can help resolve this issue.
4. Faulty temperature sensor: A malfunctioning coolant temperature sensor can cause the radiator fan to not turn on when needed. Replacing the faulty sensor may be necessary to fix the issue.
It’s important to address a malfunctioning radiator fan as soon as possible to prevent potential engine damage. If you’re unsure about the specific cause of the issue or how to fix it, it’s recommended to consult a professional mechanic for assistance.
Conclusion
In summary, a radiator fan in a Toyota may not be working due to a blown fuse, a bad relay, a broken wire, or a faulty temperature sensor. Identifying and addressing the specific cause of the issue is crucial to prevent engine damage. If you’re unsure about the cause or how to fix it, it’s best to seek professional help.

What triggers the radiator fan to turn on?

engine temperature
The engine temperature should trigger the fan to turn on. It will also turn the fan off once the engine has cooled to under 200 degrees. You may have heard of a part called the radiator fan switch or temperature fan switch. This is linked to a thermostat and works much like your home’s HVAC system.

How do I know if my radiator fan fuse is blown?

You might see a temperature light pop up on your dashboard. In this case stop driving immediately. And turn off your car. The fifth symptom is a blown cooling fan fuse.

Is the radiator fan always supposed to be running?

In normal operation, no, the radiator fan doesn’t run all the time. The fan is hooked to a sensor that measures the coolant temperature in the radiator, and when the temperature gets a little on the high side, the sensor will (basically) send a signal that turns the fan on.

Does radiator fan turn on when AC is on?

First, run the AC and see if the radiator fan runs: it’s supposed to run with the AC by default. If it doesn’t run, you likely have a low level of refrigerant in the system or a faulty switch or a sensor, or a bad fan motor, fuse, relay, or a wiring problem.

What sensor turns on the radiator fan?

temperature sensor
Both systems use a temperature sensor to determine when to start the fan. If the temperature sensor is faulty, the control unit doesn’t interact with the radiator correctly. Some cars have a separate engine coolant temperature sensor for the radiator fan and the engine control unit.

What causes a radiator fan to not turn on?

Defunct temperature sensor. The temperature sensor is the mechanism that decides when the radiator fan must kick into action. It does so by reading the temperature of the cooling system. In case this sensor is out of order, the fan won’t be able to start working.

What happens if car radiator fan is not working?

The sensor reads the system’s temperature and determines when to turn the fan on. If it isn’t functioning properly, chances are that the fan won’t turn on, and the vehicle may overheat as a result.

Can you drive with a broken radiator fan?

Driving for any prolonged period without an operating radiator fan is very likely to overheat your engine and result in an extremely expensive engine repair bill. This means that having your car towed to your mechanic is the smart move, once you are aware that you have this type of problem.

When should radiator fan kick on?

between 200 and 230 degrees Fahrenheit
In most vehicles, the radiator fan is programmed to turn on when the engine coolant reaches a temperature between 200 and 230 degrees Fahrenheit (93 to 110 degrees Celsius). However, some vehicles may have different temperature thresholds for the radiator fan to activate.

What stops a radiator fan from working?

A signal from the coolant temperature sensor is what triggers the ECU to turn on the radiator fan, and if it’s faulty, it can prevent the fan from working at all. Test the fan relay. Since the relay operates as a switch for the fan’s power, a defective cooling fan relay won’t energize the circuit.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment