AHG Auto Service » Make » Ford » Why is my Ford Flex cruise control not working?

Why is my Ford Flex cruise control not working?

Possible Reasons for Ford Flex Cruise Control Not Working
There could be several reasons why the cruise control on your Ford Flex is not working. Here are some potential causes based on the search results:
1. Defective Brake Pedal Switch or Blown Fuse: The most common reason for cruise control not working is a defective brake pedal switch or a blown fuse.
2. Communication Issues with Cruise Control Module: Communication issues with the cruise control module can also cause the cruise control to malfunction. This can be indicated by error codes such as U0104, which signifies lost communication with the cruise control module.
3. Mechanical Component Damage: In older vehicles, mechanical components such as the vacuum actuator or throttle control system could be damaged, leading to cruise control malfunctions.
4. Faulty Control Switches: Faulty control switches can also be a potential reason for cruise control not working.
Possible Solutions
If you are experiencing issues with your Ford Flex’s cruise control, it’s advisable to have it looked at by a qualified mechanic. They can diagnose the specific cause of the malfunction and recommend the appropriate solution. If your vehicle is still under warranty, it’s important to check if the issue is covered and can be fixed for free.
In any case, it’s best to have the cruise control system inspected and repaired by a professional to ensure safe and reliable operation.
If you need further assistance, it’s recommended to reach out to a certified Ford service center or a trusted automotive technician for a thorough diagnosis and resolution of the cruise control issue.

What will deactivate cruise control?

Canceling Cruise Control
To temporarily cancel cruise control without turning it off completely: Press the “Cancel” Button: Most cruise control systems have a “Cancel” button on the steering wheel. This button allows you to interrupt cruise control and return to manual control.

How do you set cruise control on a Ford Flex?

Itself. So again we turn the lane centering.

What causes control module failure?

Like all electronics, they are going to fail for various reasons. It may overheated, it may have become contaminated, it may have been subjected to too much shock and vibration, it may have been poorly made and it just died an early death. There’s no way to know unless there’s something obvious.

Can a bad battery cause cruise control not to work?

In a combustion car, the cruise control is powered by the 12V battery/system, and the 12V battery/system can fail any time the electrical system has a problem. An alternator issue, some loose wiring, a battery issue, a fuse or switch issue—could interrupt power to the cruise control and cause it to fail.

Why would my cruise control suddenly stopped working?

Since your car’s cruise control is part of an electrical system, it needs a fuse to function properly. A short circuit in this system can cause a fuse to blow, which means that the cruise control will suddenly stop working. Fortunately, replacing a blown fuse is a cheap and easy repair for any auto mechanic.

How do I activate Ford adaptive cruise control?

Select Driver Assist using the five-way steering wheel controls. Select Cruise Control. Choose Adaptive to enable Adaptive Cruise Control.

How do I get cruise control to work?

How To Use Cruise Control. 1) To initiate the cruise control system, push the ‘CRUISE’ button located on the steering wheel. The ‘CRUISE’ notification will appear on the dashboard. Then, press the accelerator pedal until you reach the desired cruise control speed.

How do you troubleshoot cruise control?

You can check to see if a fuse is blown by checking the fuse box and locate the fuse that corresponds to your cruise control. You’ll need to remove the fuse and perform a visual inspection to see if a filament on the inside is broken, indicating that the fuse is bad. If the filament is intact it’s most likely fine.

How do I know if my cruise control module is bad?

Symptoms of a Failing Cruise Control System

  1. Not Maintaining Consistent Speed. When you’ve set the cruise control, it should always maintain the speed you’ve set.
  2. The System Does Not Engage.
  3. Dashboard Cruise Control Light Issues.
  4. Cruise Control Installation in Brooklyn Park.

How much does it cost to fix cruise control?

A cruise control system can stop working due to (1) a mechanical problem (2) a blown fuse (3) a damaged speed sensor (4) a faulty brake pedal switch or (5) electrical problems. Repair costs can start at $100 and go beyond $500, depending on the affected part, labour costs, and the car brand and model.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment