AHG Auto Service » Make » Dodge » Why is my Dodge Durango not heating?

Why is my Dodge Durango not heating?

Possible Reasons for Dodge Durango Not Heating
There can be several reasons why your Dodge Durango is not heating. Here are some possible causes based on the search results:
1. Low Coolant Level: If there isn’t enough coolant in the system, the heater core may not receive enough coolant to generate heat.
2. Clogged Heater Core: Over time, the heater core can become clogged with rust or mineral deposits, blocking the flow of coolant and reducing heating performance.
3. Faulty Thermostat: The thermostat regulates the engine temperature. If it is not functioning properly, it may prevent the engine from reaching the optimal temperature for heating.
4. Blend Door Actuator: The blend door actuator controls the flow of hot and cold air. If it is malfunctioning, it may prevent hot air from reaching the cabin.
5. Bad Water Pump: A faulty water pump can affect the circulation of coolant, leading to insufficient heat in the cabin.
6. Dirty Cabin Air Filter: A dirty cabin air filter can restrict airflow, resulting in weak heater airflow.
7. HVAC Control Unit Malfunction: A malfunctioning HVAC control unit can affect the operation of the heating system.
It is important to note that these are just possible causes and a proper diagnosis by a qualified mechanic is recommended to determine the exact issue with your Dodge Durango’s heating system.
Steps to Troubleshoot the Issue
If your Dodge Durango is not heating, you can try the following steps to troubleshoot the issue:
1. Check Coolant Level: Ensure that the coolant level is sufficient. If it is low, refill it to the recommended level.
2. Inspect Heater Core: If you suspect a clogged heater core, it may need to be flushed or replaced. Consult a mechanic for proper diagnosis and repair.
3. Test Thermostat: A faulty thermostat can be tested by checking the temperature of the water pump housing. If it is not reaching the optimal temperature, the thermostat may need to be replaced.
4. Inspect Blend Door Actuator: Check if the blend door actuator is functioning properly. If it is not, it may need to be replaced.
5. Check Water Pump: If the water pump is suspected to be faulty, have it inspected by a mechanic to ensure proper coolant circulation.
6. Replace Cabin Air Filter: If the cabin air filter is dirty, replace it to improve airflow to the heater.
7. Reset Climate Control System: In some cases, resetting the climate control system may resolve issues. Refer to your vehicle’s manual for instructions on how to reset the system.
If these troubleshooting steps do not resolve the issue, it is recommended to take your Dodge Durango to a qualified mechanic for further diagnosis and repair.
Please note that these suggestions are based on general information and it is always best to consult a professional for an accurate diagnosis and appropriate solutions for your specific vehicle.

Why is my heat blowing cold air?

Common Reasons For Furnaces Blowing Cold Air:
Your Thermostat is Set Incorrectly. The Furnace Filter is Dirty. Your Furnace Has Overheated. The Condensate Line is Clogged.

Why is my car blowing out cold air when the heat is on?

If there isn’t enough coolant in your system, the heater core will blow cold air into your car. Solution: If you confirm that a low coolant level is the source of your problem, you simply need to top off your coolant. You may want to check for leaks as well if you just recently refilled your coolant.

How do I know if my heater core is clogged?

In some instances the heat in your car may work just fine during mild cold spells. But fail when the cold gets really bad this. Situation is suggestive of a heater core that is partially clogged.

Why is my heating not getting hot in my car?

Faulty heater cores and low or contaminated coolant levels often come hand in hand, and both issues may lead to your engine overheating and your heater not blowing hot air.

Why is cold air blowing when the heat is on?

There are 3 main reasons your vents are blowing cold air: Your thermostat is set for cooling mode. You have a malfunction that needs a qualified technician to diagnose. You are not familiar with the normal operation of your heating system.

Should I turn my heat off if its blowing cold air?

Typically, there’s a 10 to 15 minutes allowance for this. However, if after this time it’s still producing cold air, then there’s an underlying problem that needs to be addressed. It would be wise to turn the furnace off and get in touch with a pro immediately for help dealing with the issue.

Why is my car not throwing any heat?

Low coolant: Whether caused by a leak or water evaporation, low coolant is the most common source of poor heater output. Thermostat: A stuck-open thermostat prevents the engine (and coolant) from heating up. Heater core: A clogged heater core restricts coolant flow, giving up little or no heat.

Why is my heater blowing cold air?

Common Reasons For Furnaces Blowing Cold Air:
Your Thermostat is Set Incorrectly. The Furnace Filter is Dirty. Your Furnace Has Overheated. The Condensate Line is Clogged.

How do you diagnose no heat in a car?

How to Troubleshoot Car Heater Problems

  1. Check the Coolant. Low coolant can’t reach the heater core and generate warm air.
  2. Assess the Heater Core. Make sure heater hoses are in good shape.
  3. Inspect the Water Pump.
  4. Listen to the Fan.
  5. Look for Blown Fuses.

Why is my car blowing but no heat?

If one or more of these issues is present, your vehicle may blow out cool air rather than heat: Not enough coolant in the engine. Problems with the heater core. Clogged or broken heating controls.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment