AHG Auto Service » Make » Chevrolet » Why is my Chevy Malibu window not working?

Why is my Chevy Malibu window not working?

Possible Causes of Chevy Malibu Window Not Working
There are several potential reasons why your Chevy Malibu’s window may not be working:
1. Power Window Motor Failure: Over time, the power window motors in Chevy Malibus can fail, requiring replacement. If you’ve verified that the motor is getting power but it’s still not working, it may be time to get a new one.
2. Switch or Motor Issue: If your window won’t go up, it’s typically caused by a problem with the switch or the motor itself.
3. Fuse, Relay, or Electrical System: Issues with the fuse, relay, or electrical system can also cause the window to not go up or down.
4. Window Regulator Motor: A failing power window motor can cause the affected window to move slowly or stop in mid-travel. Replacing the faulty window motor can commonly correct this issue.
5. Master Control Panel: Problems with the master control panel on the driver’s door can also affect the operation of the windows.
Troubleshooting Steps
To troubleshoot the issue with your Chevy Malibu’s window, you can consider the following steps:
– Check the power window fuse to ensure it’s intact.
– Verify that the ignition switch is on and the driver’s panel lock-out switch is not engaged.
– Test each window separately to identify any specific issues with individual windows.
– If the issue persists, it may be necessary to inspect the power window motor, switch, and electrical connections for any faults or failures.
If you’ve exhausted these troubleshooting steps and the issue still persists, it may be best to consult a professional mechanic or technician for further diagnosis and repair.
I hope this helps you diagnose and address the issue with your Chevy Malibu’s window!

Why would only one power window not work?

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

Is there a way to get an electric window up manually?

Stand at the end of the open door and place one palm on the outside of the window and the other palm facing it on the inside of the window. Pressing the glass firmly between your palms, slowly move your hands up to raise the window.

Why did my window suddenly stop working?

Electrical problems from the window switch –– the button you press to raise or lower the window –– can also cause window problems. Every time you press it, the switch signals the motor and window track to open or close the windows. Damaged, loose, or faulty wires can interrupt signaling and cause the windows to stall.

How do you fix a power window that won’t go up?

If your window won’t roll up, check the fuse, try other window switches, and inspect for obstructions before seeking professional help. Can you manually raise a power window? You can manually raise a power window by carefully holding the glass and applying upward pressure while someone operates the window switch.

How do I know if my power window fuse is blown?

If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.

Does each power window have its own fuse?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.

Why is one window not working on my car?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

What to do when window motor stops working?

Here are some basic troubleshooting tips to try when your electric windows won’t roll up or down:

  1. Check the window safety lock-out switch.
  2. Check the fuses.
  3. Push the window switch up and down and listen.
  4. Push the window switch and watch the dash gauges.
  5. Try the other switches.
  6. Swap switches if possible.

How do I force a power window up?

To get your window back on its track, try slamming the car door while holding the window switch in the “up” position. If that doesn’t work, you might have to take the door panel off so you can slot it back into place.

Can I fix power window myself?

A shop will charge you at least a few hundred dollars to replace the motor/regulator, but you can do a window regulator repair and power window repair yourself in about four hours. Regulators are available online or at auto parts stores.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment