Why is my Chevy Equinox driver window not working?

Possible Causes of Chevy Equinox Driver Window Not Working
The driver side window in a Chevy Equinox not working can be attributed to a few common issues. One possible cause is a malfunctioning window motor, which can wear out over time due to mechanical usage. Another potential cause could be wiring issues or a faulty switch. Additionally, if the vehicle is equipped with auto power windows, a common cause for the windows not working is when the 12-volt battery has been replaced or disconnected.
Troubleshooting and Solutions
If you suspect the window motor, it may be necessary to remove the door panel and clean the motor and its housing, as debris and shavings can accumulate over time and affect its performance. If the issue is related to wiring or the switch, it may require a closer inspection by a professional to diagnose and resolve the problem.
If the vehicle is equipped with auto power windows and the issue arises after a battery replacement or disconnection, resetting the windows may be necessary to restore their functionality.
It’s important to note that these are common causes and troubleshooting steps, and it’s always recommended to consult a qualified mechanic or technician for a thorough diagnosis and repair.
I hope this information helps you identify and address the issue with your Chevy Equinox’s driver side window!

Can I fix power window myself?

A shop will charge you at least a few hundred dollars to replace the motor/regulator, but you can do a window regulator repair and power window repair yourself in about four hours. Regulators are available online or at auto parts stores.

How can you tell if a window fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Does each power window have its own fuse?

With some arrangements a single fuse in the main supply line is used to protect the complete window system so a failure here affects all the windows. Other cars have individual fuses for each window motor so failure will only affect the one window.

Where is the fuse for the driver side?

The under-hood fuse box is located near the back of the engine compart- ment on the driver’s side. To open it, push the tabs as shown. If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.

Can I force my power window up?

Use Assistance – Have a friend press and hold the window button. Lift the Window – Using gradual pressure, press the window up with the palms of your hands. If gripping the window from the top for added force, be careful not to get hands and fingers caught as it comes closed.

What controls driver side window function?

The master switch is usually located in the driver door or the console. It is called a master switch because it operates all the power windows in the vehicle and contains the window lock-out switch (if applicable).

How do you fix an electric window that won’t go up?

If your window won’t roll up, check the fuse, try other window switches, and inspect for obstructions before seeking professional help. Can you manually raise a power window? You can manually raise a power window by carefully holding the glass and applying upward pressure while someone operates the window switch.

Is there a way to get an electric window up manually?

Stand at the end of the open door and place one palm on the outside of the window and the other palm facing it on the inside of the window. Pressing the glass firmly between your palms, slowly move your hands up to raise the window.

Why is my car window on the driver side not working?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

Why would only one power window not work?

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.