Why is my AC not turning on Subaru?

There could be several reasons why your AC is not turning on in your Subaru. Here are some possible causes to consider:
Electrical Problems:
– An electrical problem could be the cause of the AC issues. You can start by checking and replacing the AC fuse. If replacing the fuse solves the issue, that’s great! However, if the fuse blows again soon or if replacing the fuse does nothing, then your Subaru likely has deeper electrical issues that need to be diagnosed by expert technicians.
Damaged Condenser:
– The condenser is responsible for cooling down the gaseous refrigerant and turning it into a liquid. If the condenser is damaged, it may not function properly or at all. It’s possible that the condenser is blocked, in which case it may be unblocked. However, if the condenser has sustained actual damage, it will need to be replaced.
Low Refrigerant:
– If the AC system is low on refrigerant, it may not function properly. Low refrigerant levels can cause the system to not run at the proper pressure, leading to poor performance or no cooling at all. Additionally, the lubricant in the system, R134a, is also the refrigerant. Using the AC when it’s low on refrigerant can damage the system.
Faulty Blend Door Actuator:
– A faulty blend door actuator can cause issues with the AC system. Symptoms of a faulty blend door actuator include a clicking sound coming from under the dashboard when the AC is turned on or when adjusting the temperature. A knocking noise could also indicate a bad blend door actuator, although it is rare .
Compressor Issues:
– The compressor is the heart of the AC system and is responsible for converting the refrigerant into a liquid. If the compressor is broken or not functioning properly, it can lead to AC problems. Regularly turning on the AC helps keep the compressor parts movable. If the AC is not used for a long time, the parts may stick .
It’s important to note that these are just possible causes based on the information provided. To accurately diagnose and fix the issue, it is recommended to consult with expert technicians who can assess your specific Subaru model and perform a thorough inspection.
I hope this helps! Let me know if you have any other questions.

Why is my air conditioner not turning on in my car?

Your vehicle’s air-conditioner not working is most likely caused by a failing compressor or a freon leak. Though these are the most obvious reasons that the AC isn’t working in your car, a dirty cabin filter or a bad compressor belt could also be the problem.

Why is my AC not working in my Subaru Outback?

The most common fault on the Subaru Outback air conditioning system is the discharge aircon hose leaking at the ferrule crimp. This hose is repairable by cutting off old ferrules and welding new ones on and replacing the rubber hose section. One other issue they have can be the AC compressor clutch coil shorting out.

How do I know if my Subaru AC compressor is bad?

Common Signs of a Failing Subaru AC Air Compressor

1. High Cabin Temperatures. One of the very first signs of a failing compressor is the failure of the air conditioner to blow cold air as it used to do.
2. Loud Noise.
3. Compressor Clutch Not Moving.

How much does it cost to recharge a car AC?

A professional AC recharge cost ranges from $150 – $300 on average depending on the make and model of your vehicle.

Where is the AC reset button?

It’s a small, red button usually located on or around the unit. The button should have a clear ‘reset’ label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn’t, press the button again for another three seconds.

Can you drive with broken AC compressor?

It’s not a good idea to drive with a broken A/C compressor. While you can sometimes drive your vehicle with a broken A/C compressor without needing expensive repairs, it’s not wise. When these integral parts of your car’s air conditioning system break, that can cause greater damage to your engine and even your health.

What would cause your AC not to turn on?

Troubleshooting a Broken Air Conditioner

• Check Your Thermostat.
• Check Your Air Filter.
• See if the Emergency Shut-Off Switch Is OFF.
• Check the Inside Unit’s Power Switch.
• Make Sure the Drain Pan & Lines Aren’t Clogged.
• Look for a RESET Button.
• Look for Icy Buildup.

How do I force my AC to turn on?

If the circuit breaker has tripped, you will need to reset it for the air conditioner to start working again. If your circuit breaker does trip, here’s how to reset it: Locate your main circuit breaker and switch it back to the “On” position. Wait 30 seconds and turn on your air conditioner again.

What to check if car AC is not working?

We’re not saying these are the only reasons your car AC isn’t blowing cold, but these are the usual suspects.

1. Your Car AC Needs to Be Recharged.
2. The Blend Air Door Is Stuck.
3. Your Car Air Conditioning Compressor Isn’t Engaging.
4. The Fan Motor Has Failed.
5. You Have a Broken or Blocked Condensor.

Why is my AC not working in my Subaru?

The first possibility is that there is a refrigerant leak. The leak may be found in the evaporator, condenser or hose in which case you should bring your car to a mechanic to be repaired. Another reason that your air conditioner may not be blowing cool air is because the compressor has gone bad.