AHG Auto Service » Make » Ford » Why is my AC not cooling in my Ford Escape?

Why is my AC not cooling in my Ford Escape?

Possible Reasons for AC Not Cooling in Ford Escape
Based on the information provided, there could be several reasons why the AC in your Ford Escape is not cooling properly. Here are some potential causes based on the search results:
1. Clogged A.C. Condenser Coil: The condenser coil may be clogged with dirt and bugs, hindering proper airflow across the coils, especially in high temperatures.
2. Orifice Tube Filter: The orifice tube filter, located in the high side line of the A.C. system, could be clogged, affecting the cooling performance.
3. Water Getting in Under the Seal: Water getting in under the seal may be causing the A/C to not work properly, especially on hotter days when the A/C has to work harder.
4. Refrigerant Level: Low or overcharged refrigerant can lead to the A/C not cooling properly.
5. Compressor Malfunction: A malfunctioning compressor can also be a common cause of the A/C not cooling properly.
6. Clogged Cabin Air Filter: A clogged cabin air filter can hinder proper airflow and cooling in the cabin.
7. Dirty Condenser or Evaporator Coils: Dirt and debris on the condenser or evaporator coils can impact the cooling performance of the A/C system.
8. Faulty Blend Door Actuator: A faulty blend door actuator can lead to the A/C blowing warm air instead of cooling properly.
9. Climate Control Unit Issue: In rare cases, a fault in the climate control unit can cause the A/C to stop cooling.
10. Refrigerant Leak: A refrigerant leak in the hoses or pipes can lead to the A/C not working properly.
Recommendations
Based on the potential causes mentioned above, here are some recommendations to address the issue:
– Cleaning the A.C. Condenser Coil: Consider cleaning out the A.C. condenser coil to ensure proper airflow across the coils.
– Check Refrigerant Level: Have the refrigerant level checked and adjusted if necessary to ensure it is at the correct level.
– Inspect and Replace Filters: Check and replace the orifice tube filter and cabin air filter if they are found to be clogged.
– Professional Inspection: Consider taking the vehicle to a professional mechanic to diagnose and address any compressor, blend door actuator, or climate control unit issues.
It’s important to address these potential causes systematically to identify and resolve the specific issue affecting the A/C performance in your Ford Escape.

How do I fix my AC that is not cooling?

Check the air filter and replace the filter if it’s dirty. Look for dirt clogging the condenser fins on the outside unit and clean the fins if necessary. Check for a clogged condensate drain line and clear the clog if condensate water isn’t draining from the unit.

Why is my car AC full but not cooling?

The most common causes of broken air conditioning are leaks or compressor issues. If your air is blowing cool but not cold, the problem could be a clogged filter, cooling fan problem, radiator trouble, or it could simply be that you need to recharge your AC.

Why is my AC blowing hot air Ford Escape?

The top three reasons your car AC is blowing hot air are: Loss of refrigerant. Broken condenser. Electrical system issues.

How do I reset my Ford air conditioner?

Reading about 38 degrees Celsius. Step 4. Shut down the car. After. The three minutes have elapsed go ahead and turn off your car step 5. Reinstall the fuses.

How much does it cost to fix AC in Ford Escape?

The average cost for a Ford Escape AC Condenser Replacement is between $644 and $752. Labor costs are estimated between $279 and $352 while parts are priced between $365 and $400.

Why is fixing AC in car so expensive?

These can be costly to fix due to being challenging to get to and expensive to purchase. Refrigerant recovery is time-consuming, typically requiring three hours or more to service. All these things make servicing an automotive air conditioner something that is beyond the skill level of the average car owner.

Is there an AC reset button?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel.

Why would AC be running but not cooling?

There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.

Where is the AC reset button?

It’s a small, red button usually located on or around the unit. The button should have a clear ‘reset’ label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn’t, press the button again for another three seconds.

How do you fix an AC that is blowing but not cold?

What to Do When Your Air Conditioner Isn’t Blowing Cold Air

  1. Check the Thermostat Fan Setting. Is your air conditioner blowing cold sometimes but warm at other times?
  2. Replace Your Filter.
  3. Inspect the Outside Unit.
  4. Check Your Thermostat.
  5. Check Your Air Filter.
  6. Make Sure There is Electricity Going to Your AC.
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment