Why is it called a dentside Ford?

Why is it called a dentside Ford?
The term “dentside” is used to refer to the sixth generation of Ford F-Series trucks, which were produced from 1973 to 1979. These trucks are called “dentsides” because of the distinctive concave indentation that runs along the side of the truck’s body [[4]].
The previous generation of Ford trucks, produced from 1967 to 1972, are known as “bumpsides” because they had a convex body line that protruded out from the body.
The dentside trucks were a significant departure from the previous generation, with straight sides and no bulges, giving them a more modern and aerodynamic look. Ford made a serious commitment to battle rust and corrosion, which had been a problem in earlier models.
The term “dentside” is a slang term used by Ford enthusiasts to distinguish this particular generation of trucks based on their body style. The concave indentation along the side of the truck is the defining feature that sets them apart from other models.
So, the dentside Ford trucks are named after the distinctive inward dent or concave feature running along the side panel of the truck’s body.

What are 90s Ford trucks called?

Ford F-Series eighth generation (1987–1991) Successor. Ford F-Series (tenth generation) (1997–2003) Ford Super Duty (F-250 and above)

What does the F in F-150 stand for?

Now that you know the F-150 meaning, and that it simply classifies this full-size pickup as Ford’s half-ton truck, it’s time to get behind the wheel and experience its power!

What years are Dentside Fords?

The sixth generation of the Ford F-Series, also known as the “dentside Ford” to enthusiasts, is a line of pickup trucks and medium-duty commercial trucks that were produced by Ford Motor Company from the 1973 to 1979 model years.

What did Ford originally stand for?

There are many things people say it stands for, but is Ford actually an acronym for something? The short answer is no. Ford was named after the creator of the very first Ford vehicle back in 1908, Henry Ford. He was an engineer who strived for excellence and established Ford Motor Company in 1903.

Why is it called a F-150?

This eventually changed to F-100 (for a 1,000-pound payload capacity), F-150 (for a 1,500-pound capacity) and F-250 (for a 2,500-pound capacity). In that case, you didn’t have to remember that “F-3” meant “2,000 pounds” — you just looked at the truck’s badge and you instantly had the payload capacity.

Why do they call them Dentside Fords?

In 1973, Ford introduced the sixth generation F-100, dubbed the “dentside”. This generation was named for the distinctive indentation that ran along the side of the truck’s body. Unlike the “bumpside”, the “dentside” had straight sides and no bulges, giving it a more modern, aerodynamic look.

What is the difference between Dentside and Bumpside?

NOTE: All references to ‘bumpside’ and ‘dentside’ trucks in this article refer to the differences in the body-side contours. The ’67-’72 bumpside trucks have a convex contour (a ‘bump’) running down the body’s beltline, whereas the ‘dentside’ trucks have a concave contour (a ‘dent’), as pictured in Fig. 1 at right.

What are Ford Highboys?

So, what actually is a Highboy? A Highboy (sometimes Hi-Boy) is an F-250 made between 1967-1977 with 4WD. Because the driveline required a divorced transfer case, and because it sat further back, a longer front driveshaft was needed. This meant more clearance was needed, and so the F-250’s front end sits up higher.

What engine came in the Dentside Ford?

Ford put an array of engines under Dentside hoods over the course of its seven-year production run: 240- and 300-cubic-inch sixes plus 302-, 351-, 360-, 390-, 400-, and 460-cubic-inch V-8s gave buyers plenty to choose from.

What is an old Ford truck called?

The first-generation F-Series pickup (known as the Ford Bonus-Built) was then introduced in 1948, becoming the iconic Ford F-1, F-100, and bestselling F-150 models over the years.