Why are the windows not working in my Dodge Durango?

Possible Reasons for Dodge Durango Power Windows Not Working
There are several potential reasons why the power windows in a Dodge Durango may not be functioning properly. Based on the search results, the following factors could be contributing to this issue:
1. Master Window Switch Malfunction: The master window switch, located on the driver’s side, controls all the windows in the vehicle. If this switch is faulty, it can affect the operation of all the windows.
2. Fuse Issues: Problems with the fuses, including a blown fuse or loose wiring, can lead to power window malfunctions.
3. Window Regulator or Motor Problems: Issues with the window regulators, motors, or wiring harness can also cause the power windows to stop working.
4. Auto Window Reset: In some cases, if the 12-volt battery has been replaced or disconnected, the auto power windows may need to be reset to restore their functionality.
5. Driver-Side Control Malfunction: Malfunctions in the driver-side control panel can affect the operation of the passenger-side window.
Steps to Troubleshoot and Resolve the Issue
To address the power window issue in a Dodge Durango, the following steps can be taken:
– Check the Master Window Switch: Verify if the master window switch is functioning properly. If it’s found to be faulty, replacing it may resolve the issue.
– Inspect the Fuses and Wiring: Check the fuses and wiring related to the power windows to ensure they are in good condition and properly connected .
– Reset Auto Windows: If the auto power windows are not working after a battery replacement or disconnection, performing a reset procedure may restore their functionality.
– Address Specific Window Issues: If the problem is isolated to a particular window, such as the passenger-side window, focus on troubleshooting and resolving issues specific to that window.
Conclusion
In summary, the power windows in a Dodge Durango may stop working due to issues with the master window switch, fuses, wiring, window regulators, or auto window functionality. By systematically troubleshooting these potential causes, it is possible to identify and resolve the underlying issue affecting the power windows.

Are power windows on a fuse?

An electric window circuit
The switch is wired to the battery via a relay and a fuse or a circuit breaker. Although they can be a real convenience (no more leaning over the passenger seat to open or close the window) they can also be a considerable annoyance when they stop working.

Why are my electric windows not working?

Visually inspect cables or window guides for broken or misaligned pieces. If you see a loose or broken cable and hear the motor moving when you hit the window switch, the window regulator may need to be replaced. If the cables are intact and the guides are aligned, the window motor may have stripped gears.

Why are my window controls not working?

If none of the power windows work, chances are the problem is a blown fuse or a bad relay. Although they are two separate problems, the symptoms are often very similar. A full inspection of the fuses and car computer system, will be needed to determine where the problem is and how to fix it.

Why did my car window randomly stop working?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

How do I know if my power window fuse is blown?

If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.

Is there a fuse for power windows?

Check the fuse
Other cars have individual fuses for each window motor so failure will only affect the one window. In some cars the fuse is in the main fusebox but many makers use in-line fuses so check with your manual to find where the fuse is and replace it if blown.

How do I reset my window controls?

Hold the key down for 2-5 seconds after the window is down.
Once your window is all the way down, hold the button down for 2-5 seconds. Release the button after you’ve held it down for a short period of time. On some vehicles, the required time to reset the window is 2 seconds. On others, it is 5 seconds.

What causes a power window switch to go bad?

4) The power window switch can go bad
Over time this switch can go bad and need to be replaced. This switch can also become faulty if it’s subjected to moisture from a window leak or liquids spilled that seep into the working components.

How can you tell if a window fuse is blown?

If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

What would cause windows to stop working?

Electrical problems from the window switch –– the button you press to raise or lower the window –– can also cause window problems. Every time you press it, the switch signals the motor and window track to open or close the windows. Damaged, loose, or faulty wires can interrupt signaling and cause the windows to stall.