Why are my power windows not working Dodge Durango?

Possible Causes for Power Windows Not Working in a Dodge Durango
There can be several reasons why the power windows in a Dodge Durango may not be working. Based on the search results, here are some possible causes:
1. Faulty master window switch: The master window switch, located on the driver’s side, controls all the power windows in the vehicle. If the master switch is faulty, it can cause all the windows to stop working.
2. Blown fuse: A blown fuse can also cause the power windows to stop working. It is recommended to check the fuses related to the power windows, such as fuse #17 and #18, to ensure they are not blown.
3. Wiring issues: Loose or damaged wiring can disrupt the power supply to the windows, resulting in their malfunction. It is suggested to check for loose or damaged wiring connections, particularly in the driver’s door panel.
4. Defective window motors: If the power windows are not responding to any commands, it is possible that the window motors are defective and need to be replaced.
5. Faulty window switches: Individual window switches on the doors may also be faulty, preventing the windows from functioning properly.
Troubleshooting Steps
To diagnose and resolve the issue with the power windows in a Dodge Durango, you can try the following steps:
1. Check the fuses: Start by checking the fuses related to the power windows, such as fuse #17 and #18. If any of the fuses are blown, replace them with new ones.
2. Inspect the master window switch: Examine the master window switch on the driver’s side. Check if it is functioning properly and if any of the buttons are stuck or unresponsive. If necessary, consider replacing the master switch.
3. Inspect the individual window switches: Test the individual window switches on each door to see if they are working. If the windows respond to commands from the individual switches but not from the master switch, it may indicate a problem with the master switch.
4. Check for loose or damaged wiring: Inspect the wiring connections in the driver’s door panel for any signs of loose or damaged wires. Ensure that all connections are secure and intact.
5. Consider professional assistance: If the above steps do not resolve the issue, it may be necessary to consult a professional mechanic or an authorized Dodge service center for further diagnosis and repair.
Please note that these troubleshooting steps are general suggestions and may not address all possible causes. It is always recommended to consult the vehicle’s manual or seek professional assistance for accurate diagnosis and repair.
I hope this helps! Let me know if you have any other questions.

Why are my electric windows not working?

Visually inspect cables or window guides for broken or misaligned pieces. If you see a loose or broken cable and hear the motor moving when you hit the window switch, the window regulator may need to be replaced. If the cables are intact and the guides are aligned, the window motor may have stripped gears.

Where is my power window fuse?

This is usually located within the dash of the car by the steering wheel, and there is another under the hood of the car. Once you locate the fuse box that corresponds to the power windows, if the fuse is blown, replace it with the same type of fuse.

Can you reset power windows?

The automatic window function relies on a sensor and electrical components to interpret when a window is open or closed, so replacing your car’s electrical power source can mess with these settings. To reset the memory settings for your window, press the button for each window down and hold it for 2-5 seconds.

Are power windows on a fuse?

An electric window circuit
The switch is wired to the battery via a relay and a fuse or a circuit breaker. Although they can be a real convenience (no more leaning over the passenger seat to open or close the window) they can also be a considerable annoyance when they stop working.

Why would my automatic window stop working?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

How do you reset a power window switch?

Window Automatic Up/Down Reset Procedure

1. Turn the Car ON.
2. Push the Power Window Switch down to lower the Window completely.
3. Push the Power Window Switch down again.
4. Pull the Power Window Switch up to raise Window completely.
5. Pull the Power Window Switch up, again.
6. Turn the car OFF.
7. Turn the car ON.

Can I fix power window myself?

It’s possible for a DIYer to replace a window motor, yes. It takes common tools and some time, but it’s not the most complicated repair on a vehicle.

Does one fuse control all power windows?

Blown Fuse
A blown fuse will typically impact all the windows in your car. Your owner’s manual will have information about which fuse needs to be replaced. Depending on your vehicle, you may be able to replace it yourself.

Why did all my power windows stop working?

Overheated Motors
Each door panel has a power motor attached to its window glass. Sometimes, these electric motors overheat and cause the windows to stick. Letting them cool off can get them working again. If not, you may need a technician to remove the panel and inspect the motor and wiring.

How do I know if my power window fuse is blown?

If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.