Which coolant to use for Chevy Sonic?

Coolant for Chevy Sonic
The recommended coolant for a Chevy Sonic is a 50/50 mixture of clean, drinkable water and DEX-COOL coolant. It’s important to ensure that the cooling system, including the coolant surge tank pressure cap, is cool before adding the coolant. Using plain water or the wrong mixture can lead to the engine getting too hot without triggering the overheat warning, potentially causing the engine to catch fire and posing a risk of burns. Therefore, it’s crucial to use the specified 50/50 mixture of clean, drinkable water and DEX-COOL coolant.
Additionally, it’s mentioned that Prestone OAT type coolant is approved for use in the Sonic engine and meets the GM warranty. This type of coolant is recommended to prevent damage to the cooling system, and it’s advised not to use any coolant past 50,000 miles. Regularly changing the coolant, ideally at half that mileage, can help prevent damage to the cooling system.
It’s important to note that using the correct coolant is crucial for the proper functioning and maintenance of the engine. The coolant serves the vital function of capturing the heat produced by the engine’s operation and transferring it to the radiator to lower the temperature. Therefore, using the recommended coolant is essential for the optimal performance of the engine.
In summary, for a Chevy Sonic, it’s recommended to use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant, or Prestone OAT type coolant, to ensure the proper functioning and maintenance of the engine’s cooling system.

What coolant does a 2013 Chevy Sonic take?

The 2013 Chevy Sonic uses Dexcool 50/50 antifreeze engine coolant. It has a capacity of about 6.9 quarts.

What antifreeze does a 2015 Chevy Sonic take?

Notes: Peak CleanGuard 50/50, 1 gallon.

What antifreeze goes in a 2014 Chevy Sonic?

Notes: Prestone max antifreeze/coolant all vehicles – 56/44 premixed – 1 gallon.

Does Chevy need Dexcool?

When mixed, these two products will react forming a gel that can prevent your engine from cooling properly. It can even damage multiple components of your cooling system which then must be flushed or replaced which is expensive. For that reason, the best thing for your Chevy or GM vehicle is to stick with Dex-Cool.

What color coolant does Chevy use?

If the vehicle is before 1996 then it is the green color coolant, ethylene glycol. Or if it is from later then Dex-cool (orange). “Dex-Cool is made up of combinations of different phosphates and silicates as well as an organic acid technology that helps minimize corrosion in aluminum engines.

What happens if I put the wrong coolant in my car?

Putting the Wrong Engine Coolant in Your Car
As mentioned above, the mix can solidify, block your engine, and cause overheating, which can, in turn, cause the following problems: Degraded cylinder heads. Head gasket breakage. Marred hoses.

Does Chevy use special coolant?

Every vehicle manufacturer, including Chevrolet has developed its own coolant or requires a conspicuous coolant that is unique to particular years and models. There are many colors of coolants to help distinguish each including yellow, red, green, blue, purple and orange.

What color is Chevy coolant?

The recommended mix is 60% water, 40% Dexcool – good down to -18 F, below that use 50/50. Make sure it is labelled CONCENTRATE, not 50/50. Yep, the coolant should be orange in color.

What happens if you use the wrong type of coolant?

Putting the Wrong Engine Coolant in Your Car
As mentioned above, the mix can solidify, block your engine, and cause overheating, which can, in turn, cause the following problems: Degraded cylinder heads. Head gasket breakage. Marred hoses.

Does it matter what coolant I use?

What Coolant Does Your Car Need? Different vehicles require different coolants. There are varieties for every type of vehicle, from diesel engines to American, Asian and European vehicles. Each one is specifically formulated to keep its designated engine type running in extreme temperatures.