Locating Transmission Fluid in a 2014 Chevy Cruze
The transmission fluid in a 2014 Chevy Cruze is located in a specific area, and it’s important to know where to find it for maintenance and checks.
The type of transmission fluid the 2014 Chevy Cruze uses is Dexron Vi ATF. The recommended fluid for the 2014 Chevy Cruze is Acdelco 10-9395 Dexron Vi automatic transmission fluid.
The vehicle is not equipped with a transmission fluid level dipstick. There is a special procedure for checking and changing the transmission fluid, and it is recommended to have this done at the dealer. The check procedure involves getting the transmission fluid up to 185°F, car level, running in Park, and the fluid check plug removed. If filled correctly, fluid will dribble out.
If you are having problems with the transmission in your Cruze, such as clunky shifting or hesitation, it’s recommended to check the fluid level first, as it can often resolve such issues /transmission_fluid/check_fluid_level).
A transmission flush is usually twice the price of a fluid change due to the amount of difficult time the service takes and the fact that the flush not only replaces the fluid in the pan but also removes excessive fluid from the cooler lines and other components of the transmission. A 2014 Chevy Cruze transmission flush also uses about 10 quarts of fluid to entirely clean and flush out the system.
Contents
- Where do you check the transmission fluid on a 2014 Chevy Cruze?
- Does a 2014 Chevy Cruze have a transmission filter?
- Can I drive with low transmission fluid?
- Can you just add transmission fluid if it’s low?
- Will the engine light come on if the transmission fluid is low?
- How do you check transmission fluid without dipstick?
- How much is a transmission flush for a 2014 Chevy Cruze?
- Where do I locate the transmission fluid?
- Can I just add transmission fluid?
- What are signs of low transmission fluid?
Where do you check the transmission fluid on a 2014 Chevy Cruze?
And that is the transmission fluid check port. And that is right there. So there’s your three dots. It’s getting back on the side of the transmission. To 11 millimeter Bolt located right there.
Does a 2014 Chevy Cruze have a transmission filter?
2014 Chevy Cruze Transmission Filter
Your 2014 Chevy Cruze will also contain a pickup tube, gasket, and rubber seal which may all need to be replaced along with the filter. Your 2014 Chevy Cruze transmission filter will need to be replaced each 30,000 or 50,000 miles.
Can I drive with low transmission fluid?
Even with insufficient transmission fluid, you can still start and drive your manual vehicle for a few miles. Of course, this doesn’t mean you should. Every mile you force your transmission to endure without transmission fluid is likely to lead to some costly repairs.
Can you just add transmission fluid if it’s low?
Yes, you can add transmission fluid without changing it. However, it is important to keep in mind that adding new fluid to old fluid may not always be the best solution.
Will the engine light come on if the transmission fluid is low?
The check engine light comes on to let the driver know that there is a problem in one of the vehicle’s systems. A trouble code or dash light does not necessarily mean the transmission fluid is low, but a low transmission fluid level will cause the check engine light to illuminate on most modern vehicles.
How do you check transmission fluid without dipstick?
Number one check it on a level surface. Number two check it in park. Number. Three check it while it’s running number four check out an operating temperature to get the most accurate.
How much is a transmission flush for a 2014 Chevy Cruze?
The average cost for a Chevrolet Cruze Transmission Fluid Change is between $100 and $111. Labor costs are estimated between $44 and $56 while parts are typically priced around $56. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
Where do I locate the transmission fluid?
Once you’ve cleaned the dipstick return the dipstick back to the original position. And remove it again doing. This will ensure a clear reading of the fluid. Check the level on the dipstick.
Can I just add transmission fluid?
Add fluid as needed to bring to the correct level. Add the necessary amount of fluid to bring it to its proper level. Depending on whether you’re just giving your transmission fluid a top-up or you’re replacing the entire pan with new transmission fluid, you may need to add extra fluid at this point.
What are signs of low transmission fluid?
Here are the symptoms you can expect to witness when you’re low on transmission fluid.
- Grinding Noises.
- Shaking When Shifting.
- Delays Between Gears.
- Transmission Slipping.
- No Shifting at All.
- Transmission Overheating.
- The Check Engine Light.
- It Smells Like Something Is Burning.