Where is the transmission dipstick on a 2008 Dodge Caliber?

Location of the Transmission Dipstick on a 2008 Dodge Caliber
The 2008 Dodge Caliber does not have a transmission dipstick for checking the fluid level. Instead, the fluid level needs to be checked using a diagnostic tool called the Starscan diag tool or by visiting a dealership. The factory does not supply a dipstick for this model because the fluid in the continuously variable transmission (CVT) used in the Caliber needs to be checked at different temperatures using specialized equipment.
If you need to add transmission fluid to your 2008 Dodge Caliber, it is recommended to visit a dealership or a qualified mechanic who has the necessary tools and expertise to perform this task.
Please note that the information provided is based on the search results and may not be exhaustive. It is always a good idea to consult the vehicle’s owner’s manual or contact a certified Dodge technician for the most accurate and up-to-date information.

How do you check your transmission fluid if there is no dipstick?

First all sealed transmissions will have what’s called an inspection plug which will be located on the side of the transmission. Case removing the inspection plug will allow you to inspect the fluid.

Do Dodge calibers have transmission problems?

What is the Most Common Problem With the Dodge Caliber? The CVT transmission of the Dodge Caliber can jerk, leak and whine at 48,900 miles on average. Faulty ball joints and control arms are also common in the Dodge Caliber and cause suspension and steering failure.

Where do I add transmission fluid?

Now we’ll take our long funnel. And place it in the tube we remove the transmission dipstick. From. Once the funnel has been inserted you can begin adding fluid.

How much transmission fluid does a Dodge Caliber hold?

If the transmission has no fluid at all, 8.1L (8.5 quarts) is the fill capacity.

Do some automatic transmissions not have a dipstick?

Transmission dipsticks are slowly becoming a thing of the past. In just about any vehicle built prior than a few years ago, you’d find a dipstick that would allow you to check and measure the level (and quality) of your transmission fluid.

What is the most common problem with Dodge Caliber?

Bad Ball Joints and Control Arms
According to CarComplaints.com, the Dodge Caliber is known to have suspension problems commonly caused by faulty ball joints and control arms.

What transmission fluid does a Dodge Caliber take?

Valvoline – ATF+4® Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. 822348)

How much transmission fluid does a 2008 Dodge Caliber hold?

8.6 quarts
Automatic Transmission Fluid
CVT2 Total Fill 8.6 quarts.

What are signs of low transmission fluid?

Here are the symptoms you can expect to witness when you’re low on transmission fluid.

• Grinding Noises.
• Shaking When Shifting.
• Delays Between Gears.
• Transmission Slipping.
• No Shifting at All.
• Transmission Overheating.
• The Check Engine Light.
• It Smells Like Something Is Burning.

Where is transmission dipstick located?

Locate automatic transmission fluid dipstick.
Typically near where the transmission or transaxle meets rear of the engine. It looks similar to the oil dipstick.