Location of TPMS on a Chevy Malibu
The Tire Pressure Monitoring System (TPMS) on a Chevy Malibu is located within the wheel, where TPMS sensors are installed. These sensors monitor tire pressure and transmit this information to the vehicle’s ECU. If low tire pressure is detected, the TPMS sensors will transfer the information to the vehicle’s dashboard, either through an indicator light (low-line TPMS system) or by displaying each tire’s pressure (high-line TPMS system).
To reset the TPMS sensor on a Chevy Malibu, the owner’s manual provides specific instructions. For example, the manual states that there are two minutes to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer, the matching process stops and must be restarted. Additionally, there are specific procedures for resetting the TPMS sensor, such as using the trip odometer reset stem on the instrument panel and ensuring that the relearn process is completed within the specified time frame.
It’s important to note that the TPMS sensor reset process may vary depending on the model year of the Chevy Malibu. For instance, the reset procedure may apply to the seventh, eighth, and ninth generations of the Chevy Malibu, spanning from 2008 to 2021.
In summary, the TPMS on a Chevy Malibu is located within the wheel, and the reset process involves following specific instructions outlined in the owner’s manual, which may vary based on the model year of the vehicle.
If you need further assistance with resetting the TPMS sensor on your Chevy Malibu, feel free to ask for more details!
Contents
- How do you reset the TPMS light on a Chevy Malibu?
- How do I know which TPMS sensor is bad?
- Where is the TPMS monitor located?
- Where is the TPMS button on my Chevy Malibu?
- Where do I find the TPMS button?
- What does the TPMS symbol look like?
- Where is the TPMS reset located?
- How do you reset the tire pressure sensor on a Chevy Malibu?
- Can I replace TPMS myself?
- How do you reset the TPMS on a Chevy Malibu?
How do you reset the TPMS light on a Chevy Malibu?
With the car off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times and then release it. Start the car and wait 20 minutes for the sensor to refresh.
How do I know which TPMS sensor is bad?
Measure the air pressure of each tire and record them. Then, compare the data with the one displayed in your car display panel. If the reading in one tire is different from the one displayed, it might mean that there’s a problem with the TPMS sensor in that tire.
Where is the TPMS monitor located?
Where is the Tire Pressure Sensor Located? Typically, each wheel on your vehicle has a tire sensor mounted on the inside of the tire. Many vehicles use a specially designed tire valve that has the sensor integrated. Other vehicles may have the pressure sensor mounted to the inside of the wheel.
The TPMS reset button is usually located underneath the steering wheel, but check your owner’s manual for its exact location.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
What does the TPMS symbol look like?
The TPMS low tire pressure indicator is a yellow symbol that illuminates on the dashboard instrument panel in the shape of a tire cross-section (that resembles a horseshoe) with an exclamation point. That indicator light in your vehicle has a history.
Where is the TPMS reset located?
It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds.
How do you reset the tire pressure sensor on a Chevy Malibu?
After you inflate your tires, drive at 50 mph or above (in an appropriate speed zone) for 10 minutes to reset your sensor. The TPMS light should go away. Before you start your vehicle, turn your key to the “On” position.
Can I replace TPMS myself?
There are two types of TPMS sensors. One of them uses a software-based system (indirect). The second type uses sensors built into the valve stem caps (direct). The latter is the type you can install by yourself.
How do you reset the TPMS on a Chevy Malibu?
Hold the button. Now that light is out. And that light is on do the same thing to each tire. Light went out this light you should be on now and the other one should be off. This on a 2018 Malibu.