The temperature sensor on a Chevrolet Captiva is located in the inlet manifold next to the thermostat housing. It is responsible for measuring the temperature of the engine coolant and sending that information to the car’s computer. If you are experiencing issues with the temperature gauge or suspect a malfunctioning sensor, it is recommended to have a professional mechanic inspect and repair the system.
Contents
- What are the symptoms of a faulty temperature sensor?
- Where is the temperature sensor on a Chevy Captiva?
- Can you still drive with a bad temperature sensor?
- How do I check my temperature sensor?
- Are there 2 coolant temperature sensors?
- Is coolant temperature sensor easy to replace?
- Where is the temp sensor located?
- How many temperature sensors does my car have?
- What is the coolant temperature for a Chevy Captiva?
- Can you drive with a bad temperature sensor?
What are the symptoms of a faulty temperature sensor?
If the computer detects that the engine is heating up too much, the performance settings will be adjusted to prevent overheating.
- Faulty Coolant Temperature Sensor – 4 Common Symptoms.
- Fuel Consumption Increases.
- Check Engine Light Flashes.
- Engine Overheating.
- Black Smoke from the Exhaust.
- Don’t Ignore the Warning Signs.
Where is the temperature sensor on a Chevy Captiva?
The ambient temperature sensor (switch) is located either behind the front grille or in the front bumper. Its only job is to monitor air temperature (which it does through increasing/decreasing resistance in response to temperature fluctuations).
Can you still drive with a bad temperature sensor?
We would not advise you to drive with a faulty engine coolant temperature sensor. Running your car rich can lead to excess carbon buildup, which leads to its own set of serious issues. The sensor is inexpensive and quick to replace compared to any engine damage that its failure can cause.
How do I check my temperature sensor?
You can take a multimeter connect clips to both wires. then do an ohms check with boiling water. Most temp sensors are just beeswax for the temp medium. resistance will change as it gets hotter ,you will know if good or bad.
Are there 2 coolant temperature sensors?
There are two temperature sensors in some vehicles, one to send information from the engine system to the control unit and another from the control unit to the dashboard. The device follows the principle of dependence of potential difference in temperature.
Is coolant temperature sensor easy to replace?
Yes, it’s extremely easy but also very dangerous. It is shaped like a big bolt and simply unscrews from the socket. But if this is done when the vehicle is hot it will spray out boiling coolant. So the vehicle must be allowed to sit and cool down with the radiator cap off before changing the sensor.
Where is the temp sensor located?
Where is the Coolant Temperature Sensor located? The coolant temperature sensor will be located directly behind the coolant pipe. In most modern cars and vehicles, this is present behind the right cylinder head that is located right underneath the air intake pipe.
How many temperature sensors does my car have?
How many temperature sensors are in a car? In modern cars there are at least 3, but some can have over over 5. The basic temperature sensors are the ambient outside air temperature, the intake air temperature, and the coolant temperature.
What is the coolant temperature for a Chevy Captiva?
Best Answer
I was told today by a Chevy tech that 195 to 220 is normal and 260 is over heating and the engine fan should come on at 219deg.
Can you drive with a bad temperature sensor?
If your coolant temperature sensor is failing or has failed, do not continue driving your vehicle. You should get it fixed right away. A faulty sensor can lead to overheating. This will cause damage to your engine as well as other components, which will be very expensive to fix.
