Where is the temperature sensor on a 2007 Dodge Nitro?

Location of the Temperature Sensor on a 2007 Dodge Nitro
The temperature sensor in question is the evaporator temperature sensor, which monitors the temperature of the conditioned air downstream of the A/C evaporator and supplies an input signal to the A/C-heater control. According to a forum post by a Dodge Nitro owner, the evaporator temperature sensor is located in the rear of the HVAC housing, near the bottom of the instrument panel on the passenger side. It is described as having a 2-prong plug and is accessible after disconnecting the negative (-) battery cable and waiting for 10 minutes for safety.
This information is consistent with the function of the evaporator temperature sensor as described in the Dodge Nitro manual, which states that the sensor monitors the temperature of the conditioned air downstream of the A/C evaporator and supplies an input signal to the A/C-heater control. It also mentions that the sensor changes its internal resistance in response to the temperatures it monitors and is connected to the A/C-heater control through a sensor ground circuit and a 5-volt reference signal circuit.
Therefore, based on the provided information, the evaporator temperature sensor on a 2007 Dodge Nitro is located in the rear of the HVAC housing, near the bottom of the instrument panel on the passenger side.
If you need further assistance or have any other questions, feel free to ask!

Does the coolant temp sensor control the fan?

Yes, the coolant temperature sensor is an important component in controlling the radiator fan in many modern vehicles. The coolant temperature sensor monitors the temperature of the engine coolant and sends this information to the engine control module (ECM), which uses it to determine when to turn on the radiator fan.

Where is the temperature sensor on a Dodge Nitro?

On 3.7L V6 engines, the sensor is located on the front of the intake manifold, behind the alternator.

Where is the ambient air temperature sensor on a 2007 Dodge Nitro?

As for the sensor. Location it should be on the driver’s. Side behind the grill on the radiator. Support the clip-on mine seems to have disappeared. And this is a fairly common. Issue.

Are there 2 coolant temperature sensors?

There are two temperature sensors in some vehicles, one to send information from the engine system to the control unit and another from the control unit to the dashboard. The device follows the principle of dependence of potential difference in temperature.

What is the symptoms of a bad temp sensor?

4 Signs Your Coolant Temperature Sensor is Faulty

• Faulty Coolant Temperature Sensor – 4 Common Symptoms.
• Fuel Consumption Increases.
• Check Engine Light Flashes.
• Engine Overheating.
• Black Smoke from the Exhaust.
• Don’t Ignore the Warning Signs.
• Reliable Car Maintenance with Professional Auto Experts!

What happens if you drive with a bad temperature sensor?

If your coolant temperature sensor is failing or has failed, do not continue driving your vehicle. You should get it fixed right away. A faulty sensor can lead to overheating. This will cause damage to your engine as well as other components, which will be very expensive to fix.

What happens if you unplug the coolant temp sensor?

If you unplug the sensor when the engine is cold the engine may run smoothly at first but as the engine warms up the a/f mix will become too rich and the engine will start misfiring and possibly stall.

What code does a bad engine coolant temp sensor throw?

The P0117 code indicates a problem with one of the engine coolant temperature sensors in your vehicle. Find out more about this error code and what to do in case you encounter it using this short guide.

Where is the temp control sensor located?

The ECT sensor is often located on the engine block, usually near the thermostat housing. On some engines, it may be located on the intake manifold. The sensor measures the temperature of the coolant and sends a signal to the computer. The computer uses this information to adjust the ignition timing and fuel mixture.

How do I check my temperature sensor?

You can take a multimeter connect clips to both wires. then do an ohms check with boiling water. Most temp sensors are just beeswax for the temp medium. resistance will change as it gets hotter ,you will know if good or bad.