Where is the oil drain plug on a Toyota Tundra?

Location of the Oil Drain Plug on a Toyota Tundra
The oil drain plug on a Toyota Tundra is typically located on the bottom of the engine oil pan. It is used to drain the old oil during an oil change. The exact location may vary slightly depending on the model year and engine type of the Tundra, but it is generally found towards the rear of the oil pan, facing downwards at approximately a 45-degree angle from the pan.
Please note that it is always recommended to consult the vehicle’s owner’s manual for specific instructions and to ensure the correct location of the oil drain plug for your particular Tundra model.
I hope this helps! Let me know if you have any other questions.

How much oil does a 5.7 L Toyota engine hold?

If you recall, the old Tundras came with a 5.7L V8 while the new 2022 Tundras and up are sporting V6 engines. The Toyota Tundra can use anywhere from 4.8 and 8.5 quarts of motor oil depending on the model year and engine.

What size socket is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

Where is the oil drain plug located?

The oil engine drain plug will be located within 1–2 feet (0.30–0.61 m) of the front of the vehicle, and sits directly beneath the engine. It’s on the bottom of a large tank referred to as the oil pan.

What oil does the 5.7 L Tundra take?

8 liters 0W-20 Toyota Tundra motor oil, oil filter, and hardware for 2007-2021 5.7L V8 applications. RAVENOL fully synthetic USVO technology motor oil carries the Formal Licensed API SN resource conserving and ILSAC GF-5 oil specifications required for Toyota Tundra engines.

What side is the oil drain plug?

The old saying lefty loosey indicates the leftwards turning of the nut to loosen it and then they say right tight.

How many quarts of oil does a 5.7 Tundra take?

8.5 quarts
Capacity: With filter 8.5 quarts. After refill check oil level.

Do you need a special tool to remove Toyota oil filter?

Toyota has provided a drain plug for you 2.5L – 5.7L owners so you can drain the filter housing prior to removing it. This can be done by removing the metal plug to expose the valve, then installing the Motivx MX2341 drain tool. Once drained, the housing can be removed using a specialty oil filter wrench.

How do you remove a Tundra oil filter without a tool?

Or you don’t or a wrench or you don’t have the means to one or it’s not big enough you could always use your belt. And put it around your oil filter like this. So it’s round and what I do is I grab

What size is the oil drain plug on a Toyota Tundra?

Dorman – Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack (Part No. 090-038CD)

Which one is the oil drain plug?

You should be able to see and reach a large nut or plug located under the oil pan at the bottom of the engine (see Figure 13-6). This is the oil drain plug. It unscrews with the aid of an adjustable wrench.