Where is the oil drain plug on a 2008 Chevy Malibu?

The oil drain plug on a 2008 Chevy Malibu is located under the car, close to the oil pan and the oil reservoir.
Please note that it is always recommended to consult the vehicle’s owner manual for specific instructions and to ensure proper maintenance procedures.

Contents

How many quarts of oil does a 2008 Chevy Malibu take?
Where is the oil drain plug on a Chevy Malibu?
What size is a Chevy Malibu oil drain plug?
Where is the oil filter on a 2008 Chevy Malibu?
Where is the oil change plug?
How do you change the oil filter on a 2008 Malibu?
Where do you find the engine oil filter?
Where is the crankcase drain plug?
Should you replace the oil drain plug every oil change?
Where is the drain oil drain?

How many quarts of oil does a 2008 Chevy Malibu take?

5.5 quarts
Oil Grade: SEO23

Viscosity:	All TEMPS….5W-30
Capacity:	With filter 5.5 quarts. After refill check oil level.
Torque:	Oil Drain Plug…18 ft/lbs

Where is the oil drain plug on a Chevy Malibu?

In your engine. And then on the far side there that bolt on the back of it in the center of the screen. That’s your oil drain plug.

What size is a Chevy Malibu oil drain plug?

Head size (SAE/metric): 15 mm. Thread size: M12-1.75.

Where is the oil filter on a 2008 Chevy Malibu?

Oil dipstick now this takes a 1 and a quarter inch socket. It’s kind of hard to get a socket in here because the intake manifold. So we’ll choose an adjustable wrench. Let’s kick that to the left.

Where is the oil change plug?

(See owner’s manual for reference.) Locate oil drain plug, which is a long bolt head at bottom of pan. The drain plug allows the oil to drain out of the pan while you change your oil. (Note: Some vehicles have two drain plugs.)

How do you change the oil filter on a 2008 Malibu?

Allow you to loosen the cap that the oil cartridge. Goes into. So I’m going to loosen that now and swap cartridges for a new. One. So at this point all you need to do is pop out the old cartridge.

Where do you find the engine oil filter?

You can use a filter wrench to help remove. It. There will be oil in the filter. Itself that could be hot so it’s important that the oil goes into the collection.

Where is the crankcase drain plug?

And it is right there. And that’s the one you’re going to take out. The wrench on loosen. It up it’s close to where the drain plug’s just about to come out.

Should you replace the oil drain plug every oil change?

“If you have a seal on the drain plug it’s always a good idea to replace it,” Hines says. “If you’re in a situation where you can’t get that, sometimes it’s ok to reuse it.” If you do decide to reuse the drain plug seal, Hines says to inspect it for damage before reinstalling.