Where is the jack on a 2013 Chevy Silverado?

The Jack Location in a 2013 Chevy Silverado
The jack in a 2013 Chevy Silverado is located in different places depending on the cab size. In regular cab models, the jack is located behind the passenger seat. In the Double or Crew cabs, the jack is behind the passenger side of the rear seat on the shelf. The tire changing tools are held in place with wing nuts, which can be rotated counterclockwise to remove them.
It’s important to note that the jack should only be used to change a flat tire and should never be used to work under the truck, as it could fall and cause serious and potentially fatal injuries. When using the jack handle to lower the spare tire, it should be inserted into the hole in the rear bumper and turned counterclockwise.
Remember to always follow safety precautions and refer to the car manual for specific instructions on locating and using the jack in your Chevy Silverado.
If you have any further questions or need additional assistance, feel free to ask!

Where is the jack in Silverado?

All you have to do is lift up the seat. Here. And Jack is going to be located right underneath your storage area.

Does my truck come with a jack?

Today, most new cars and trucks still come with a jack and a spare; however, some models don’t in order to save weight and increase fuel economy.

Where is the car jack located?

trunk
In most vehicles, the jack is stored in the trunk or in an SUV’s wayback, under the cargo-floor cover. After you find it, you need to locate the jacking points on the car’s body, where the jack engages.

Where do I put the jack on my truck?

Locate the jack point on the vehicle
Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).

Where is the jack on a 2015 Chevy 1500?

And then these are the extensions. Now this Jack is strictly for changing tires this is not for raising the vehicle to work on the vehicle. We’re gonna place the jack for the front right on the frame.

Where is the jack on a 2014 GMC Sierra?

Your back seats here you left seat one. And two up giving you access to the rear. Underneath here you do have your jack.

How do you jack up a truck with a bottle jack?

Counterclockwise. Once all weight has been removed from the jack. Manually. Lower the piston completely by pushing down on the saddle. If the threaded saddle is raised rotate.

Where is the jack in my truck?

Typically, the floor of the trunk functions as a cover flap that can be lifted to expose an extra storage area; this is also a common storage location for spare tires. Sometimes the jack is held down by a screw mechanism or rubber band so it stays secure in its compartment.

Where is the tire jack in a 2017 GMC Sierra?

So if we look in the back seat and we’re going to start on the passenger. Side. And we flip the back seat. Up. We’re going to see our jack right here.

How do you use the jack on a 2014 Chevy Silverado?

Also coming forward you could put jack stands. Right here where my lift arms are right on the frame. Rails. Okay and then if you’re lifting the front.