Where is the fuse on a 2010 Honda Accord VSA?

Location of the VSA Fuse on a 2010 Honda Accord
The VSA (Vehicle Stability Assist) fuse on a 2010 Honda Accord is located in the interior fuse box on the driver’s side and is labeled as fuse #2. It is a 40-amp fuse that is responsible for the ABS (Anti-lock Braking System) and VSA functions.
Please note that tampering with the fuse or electrical system of a vehicle should be done with caution and only by trained professionals. If you are experiencing issues with your VSA system, it is recommended to have it diagnosed and repaired by a certified mechanic or authorized Honda service center.
Let me know if there’s anything else I can help with!

How do you turn off the VSA on a Honda Accord?

And release the brake pedal. Now press and hold the vsa. Button until it goes on press and hold until it goes off press and hold the brake pedal. Now press and hold the vsa button until it goes on.

How do I get rid of VSA light?

How Do I Turn Off The VSA Light? The warning light may turn off if you shut down the system. For that, press the VSA button on the dashboard to the left of the steering wheel. Hold it until you hear a beep sound, and another “VSA is off” light will turn on if you’ve done everything correctly.

What is the VSA signal failure on a Honda Accord?

VSA System Indicator Light
If the VSA System Indicator lights up and stays on, it means there’s a problem with the system itself. If you see it, pull over when it’s safe to do so, and turn the engine off and then back on. If the light returns, then arrange a service inspection to diagnose the fault.

Can I drive with a bad VSA module?

Sure, just don’t go hitting things. The light on indicates a fault in the system but it’s unlikely that your airbag would deploy inappropriately. More likely it wouldn’t deploy at all. Studied at Can Drive a Stick-shift Car.

What would cause a VSA light to turn on?

Then the wheel speed sensor can I get a proper. Reading from the reluctor. Also you want to remove the wheel speed sensor. And check for metal shavings. That’s on it.

How do I permanently disable VSA?

There is a procedure to completely disable traction control and VSA on the G2:

1. After starting the vehicle, press and hold the brake pedal.
2. Hold the VSA button until the VSA light comes on.
3. Hold the VSA button until the VSA light turns off.
4. Release the brake pedal.
5. Apply the parking brake.

What causes Honda VSA light to come on?

Then the wheel speed sensor can I get a proper. Reading from the reluctor. Also you want to remove the wheel speed sensor. And check for metal shavings. That’s on it.

How do I turn off VSA light?

How Do I Turn Off The VSA Light? The warning light may turn off if you shut down the system. For that, press the VSA button on the dashboard to the left of the steering wheel. Hold it until you hear a beep sound, and another “VSA is off” light will turn on if you’ve done everything correctly.

How do I reset my VSA?

So you have a ground you switch the ignition on. You will see the ABS. Light go off then you press the VSA off button the ABS light should come back on. Again. You press the VSA button and it’s reset.

Is there a fuse for the VSA light?

The VSA fuse box is located under the interior fuse box on the passenger’s side of the dashboard.