The fuse for the Vehicle Stability Assist (VSA) system on a 2007 Honda CRV is located in the interior fuse box. Specifically, it is fuse number 4, which is a 7.5 amp fuse. The interior fuse box is located under the dashboard on the driver’s side, and the fuse label is attached under the steering column. To access the fuse box, you can pull the tab in the direction shown in the illustration.
Please note that pulling the VSA fuse should only be done as a temporary solution in certain situations, such as being stuck in deep snow. It is recommended to consult the owner’s manual or a qualified technician for proper troubleshooting and repairs if you are experiencing issues with the VSA system.
Let me know if there’s anything else I can help with!
Contents
- Where are the fuses on a 2007 Honda CRV?
- Where is blown fuse located?
- How do I get rid of VSA light?
- How do I know if my Honda fuse is blown?
- How do you know which fuse is blown?
- How many fuse boxes does a Honda CRV have?
- How do you turn off the VSA on a 2007 Honda CRV?
- What is the VSA light on a 2006 Honda CRV?
- Where is the Honda HRV fuse box?
- Where are the fuses in a Honda CRV?
Where are the fuses on a 2007 Honda CRV?
If you’re facing electrical problems with your 2007–2011 Honda CR-V, one of the initial checks should be the fuse box. There are two fuse boxes in the 2007–2011 Honda CR-V. The first one is located beneath the dashboard on the driver’s side, while the second can be found in the engine compartment near the battery.
Where is blown fuse located?
Usually, it will be in your garage or your basement. Open the fuse box and look at the glass containers that hold the fuses. If you can see that the fuse is visibly broken, or there is metallic residue on the glass from the fuse blowing, you will need to replace that particular fuse.
How do I get rid of VSA light?
Press and hold the VSA OFF button until you hear a beep to turn VSA on or off. The VSA OFF indicator appears when the system is off. Traction control stops functioning, which may make it easier when trying to free your vehicle if it is stuck in mud or snow.
How do I know if my Honda fuse is blown?
And you can see that that line has been broken. Which will not allow electrical. Current to go through which shows us that that is a blown fuse.
How do you know which fuse is blown?
Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
How many fuse boxes does a Honda CRV have?
Understanding the fuse location is crucial. So come with me and stay tuned. In the 2002 to 2006 Honda CRV you’ll have two fuses used for the rear and front power socket.
How do you turn off the VSA on a 2007 Honda CRV?
For that, press the VSA button on the dashboard to the left of the steering wheel. Hold it until you hear a beep sound, and another “VSA is off” light will turn on if you’ve done everything correctly. However, and this is important, you may just need to service your vehicle.
What is the VSA light on a 2006 Honda CRV?
VSA System Indicator Light
If the VSA System Indicator lights up and stays on, it means there’s a problem with the system itself. If you see it, pull over when it’s safe to do so, and turn the engine off and then back on. If the light returns, then arrange a service inspection to diagnose the fault.
Where is the Honda HRV fuse box?
So if you don’t have any audio. Or you blew the fuse when you try to install a new car stereo that’s the one you want to replace. Thanks for watching and give a thumbs up if you liked the video.
Where are the fuses in a Honda CRV?
Interior Fuse Box
Located under the dashboard. Fuse locations are shown on the label under the steering column. Locate the fuse in question by the fuse number and label number.
