The fuse box on a 2007 Dodge Caliber is located in the engine bay, directly behind the car battery and beside the air cleaner assembly. To access the fuse box, you need to remove the black, plastic cover from the box. The relays and associated components are located in the “power distribution” box on the left-front bumper fascia.
It’s important to replace blown fuses in the Dodge Caliber with the correct amperage fuse according to the label. Repeated failures of properly rated fuses indicate a problem elsewhere in the circuit that should be addressed immediately. Fuses of the same amperage can be temporarily borrowed from another fuse location if a fuse goes out, but it should be replaced as soon as possible.
Please note that the Dodge Caliber is known for headlight issues, and the driver’s side low beam headlights may fail. If you are experiencing headlight problems, it’s recommended to check the fuse and consider resetting the Totally Integrated Power Module (TIPM) before replacing any parts.
I hope this helps! Let me know if you have any other questions.
Contents
- Where are the main fuses located?
- How do you find a hidden fuse box?
- Where is the inside fuse panel?
- Which fuse starts the engine?
- Where is the fuse on a 2007 Dodge Ram?
- Where is blown fuse located?
- How many fuse boxes does a Dodge Caliber have?
- What fuse would stop a car from starting?
- How do I know which fuse is blown in my fuse box?
- Where is the secondary fuse box?
Where are the main fuses located?
Compartment. I really don’t have an answer why there are two locations for the fuses. In the engine. Compartment. Away from a source of heat. Usually there is an electrical corner with much plastic.
Search inside your home.
Keep an eye out for a metal box, usually flush with the wall. The box will have a metal door to keep the breakers or fuses protected. Check your garage for the circuit breaker or fuse box. It might also be in a storage room, utility room, the basement, or a hallway.
Where is the inside fuse panel?
Usually, you will find two fuse boxes in the car. One is located under the hood and the other is found in the dashboard or near the steering wheel.
Which fuse starts the engine?
Depending on make & year, most later models have a high amperage fuse in the main fuse box in the engine compartment. Usually this fuse is labeled ignition. Or you can pull the fuel pump fuse. You can look at the owners manual to identify the fuse or look at the fuse box cover to see proper fuse.
Where is the fuse on a 2007 Dodge Ram?
The fusebox is the box that says “Fuse and Relay Center”, near the left front fender of your Dodge.
Where is blown fuse located?
Usually, it will be in your garage or your basement. Open the fuse box and look at the glass containers that hold the fuses. If you can see that the fuse is visibly broken, or there is metallic residue on the glass from the fuse blowing, you will need to replace that particular fuse.
How many fuse boxes does a Dodge Caliber have?
The vehicle’s fuses are located in two fuse boxes.
What fuse would stop a car from starting?
In short, a fuel pump fuse is the quickest way to disable the vehicle from starting. Other vital fuses are coil packs and electrical control units. These fuses prevent the car from starting until they are back to their respective places.
How do I know which fuse is blown in my fuse box?
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
Where is the secondary fuse box?
The secondary under-hood fuse box is next to the battery. To open it, push the tabs as shown. If something electrical in your vehicle stops working, check for a blown fuse first. Determine from the chart on pages and , or the diagram on the fuse box lid, which fuse or fuses control that device.
