AHG Auto Service » Make » Ford » Where is the fuel pump driver module on a Ford f150?

Where is the fuel pump driver module on a Ford f150?

The fuel pump driver module on a Ford F150 is located in different places depending on the model year. Here are some possible locations:
– For 2001 Ford F150: The fuel pump driver module is located at the rear of the vehicle behind the driver and rear passenger seat.
– For 2003 Ford F150: The fuel pump driver module is located in line along the fuel line, against the crossbeam on the frame, sometimes covered by a spare tire.
– For 2004-2008 Ford F150: The fuel pump driver module is mounted to the frame cross member above the spare tire under the bed.
– For 2009 Ford F150: The exact location may vary, but it is typically near the fuel filter under the hood.
Please note that these locations are based on the information provided in the search results. It’s always a good idea to consult the vehicle’s manual or seek professional assistance for accurate and specific information regarding your Ford F150’s fuel pump driver module location.

Will a bad fuel pump driver module throw a code?

A bad fuel pump will cause a lean condition, so yes, a code will eventually be thrown.

Where is the fuel module located?

More often than not, the fuel pump driver module (FPDM) is located in the back of vehicles. The exact location varies depending on the make and model of your ride, but it’s usually on the underside — specifically on the rear end of the frame.

What possible type of code would you check for a fuel pump module issue?

The P069E code indicates that the module responsible for keeping the fuel pump working has encountered a problem.

What does the fuel pump driver module do in F150?

The Fuel Pump Driver Module controls the voltage delivered to a vehicle’s fuel pump. By controlling the voltage, the module maintains optimal fuel pressure and fuel delivery to the engine throughout its full operating range.

What happens when a fuel pump module goes bad?

If your vehicle’s fuel pump cannot get gas from the tank to the engine, you will have trouble starting your car. The car will struggle to start and run because the pump cannot push enough gas through. A worn pump loses its pressure and the engine is being starved of gasoline.

How long does it take to replace a fuel pump module?

How long does it take to replace a fuel pump? In most cases, around two to three hours. However, job times can vary widely depending on how easy it is to access the pump. The fuel pump sits inside the fuel tank, and is attached to a plate on the top of the tank.

How do I know if my fuel module is bad?

For most cars the fuel pump will be located. Inside the gas tank. The first symptom of a bad fuel pump is having your check engine light on you might get a p00. Or a p0190. Both having to do with lack

Does a 2001 Ford F 150 have a fuel pump driver module?

Best Answer. Your F150 does indeed have a fuel pump driver module located above and just ahead of the spare tire.

Where is the fuel pump driver control module located?

Depending on your application, the fuel pump driver module is either located on the rear Crossrail above the spare tire or on the rear frame wall.

What are the symptoms of a fuel pump driver module?

The FPDM controls the voltage supply to the electric fuel pump to ensure it gets the right amount of power. Its location varies depending on the vehicle, but it’s usually at the back of the car. Some symptoms of a faulty FPDM include misfires, damaged fuel filters, and engine surges.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment