AHG Auto Service » Make » Ford » Where is the fuel pump driver module on a 2007 Ford Sport Trac?

Where is the fuel pump driver module on a 2007 Ford Sport Trac?

Location of Fuel Pump Driver Module on a 2007 Ford Sport Trac
The fuel pump driver module on a 2007 Ford Sport Trac is typically located under the vehicle, near the fuel tank. It is a small, black box with a wiring connector. The exact location can vary depending on the specific model and trim level of the vehicle. It may be accessed by removing the rear seat, the carpeting, or a panel in the cargo area.
If you need further assistance or detailed instructions, it is advisable to consult a professional mechanic or contact a Ford dealership for guidance.
Remember to always disconnect the battery before working on the fuel pump driver module for safety’s sake.
If you have any other questions or need further assistance, feel free to ask!

What are the symptoms of a bad fuel pump driver module?

Common Failure Symptoms

  • No start.
  • Rough idle.
  • Loss of power.
  • Hesitant acceleration.
  • Intermittent engine performance.

Can you drive with a bad fuel pump control module?

Depends on how bad the pump is if it is totally shot the answer is NO. If the pump is weak but still able to get fuel up to the engine then maybe, however you most likely will be on the side of the road waiting for the tow truck.

Will a bad fuel pump driver module throw a code?

A bad fuel pump will cause a lean condition, so yes, a code will eventually be thrown.

What happens when fuel pump module goes out?

When the driver module malfunctions, the pump won’t produce the right amount of pressure, causing the engine to run low or misfire. Your engine can also stall because of it.

Where is the fuel pump reset button on a Ford?

If you have a blown tire. Something like that. I hope this video helps you out have an awesome day thanks for watching.

Where is the fuel pump driver control module located?

Depending on your application, the fuel pump driver module is either located on the rear Crossrail above the spare tire or on the rear frame wall.

What is the code for a bad fuel pump module?

P069E
Code P069E indicates the FPCM has detected a problem with the fuel system and has sent a request to the ECM to turn on the check engine light. The check engine light is also known as the malfunction indicator lamp (MIL). A vehicle with this code should be taken in to a repair shop for diagnosis.

How do you know if you need a fuel pump module?

Difficult to Start Your Car
Difficulty starting the car can be an indication that the pump has quit altogether or has extremely low pressure, and lack of power when you’re driving is also a symptom of bad fuel pump that goes hand in hand.

How much does it cost to replace a fuel pump driver module?

How Much Does a Fuel Pump Driver Module Replacement Cost? The cost of an aftermarket fuel pump driver module replacement can range between $100 to $550 for parts alone. Several factors affect pricing, such as brand and warranty. Labor can cost you an additional $125 to $300, depending on the rates in your area.

Where is the fuel pump driver module on a Ford Explorer?

NOTE: The fuel pump driver module is located on the bottom side of the left front floor panel, above the sound insulation panel. For fuel pump driver module component location view.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment