Where is the EGR valve on a Dodge Caliber?

Location of the EGR Valve on a Dodge Caliber
The EGR (Exhaust Gas Recirculation) valve in a Dodge Caliber is located in the engine compartment, underneath the hood. It is responsible for recirculating a portion of the exhaust gas back into the intake manifold, where the engine can burn it again, thereby reducing emissions. If the EGR valve has gone bad, the car will not pass emissions.
If you are looking for the specific location, it may vary slightly depending on the year and model of the Dodge Caliber. However, generally, the EGR valve can be found in the engine compartment, often near the intake manifold or connected to the exhaust system.
If you need to replace or service the EGR valve, it’s recommended to consult a mechanic or refer to the vehicle’s service manual for specific instructions.
I hope this helps! If you have any other questions, feel free to ask.

Can I clean EGR valve without removing?

Yes, you can clean the EGR yourself by wiping off the surface with a clean cloth and brushing it with a pipe cleaning brush. You may need to soak the valve in a cleaning solution for a few minutes before brushing it.

How do you tell if your EGR valve needs to be cleaned or replaced?

When Do You Know It is Time to Clean?

1. Difficulty in starting the engine.
2. Rough idle.
3. Engine vibration.
4. Poor acceleration of the engine (during drive)
5. Engine easily running hot.
6. Engine ‘ping’ when under load.
7. Smell of unburned gas fumes.
8. Decrease in gas mileage.

Can I still drive my car with a bad EGR valve?

Technically you can drive without a working EGR valve.
The role of your EGR valve is to reduce the number of toxic NOx gases in the air, so if it isn’t working quite right, more toxic gases will be released into the air. For this reason, we don’t recommend driving without a working EGR valve for too long.

Where is the EGR valve located?

The valve is typically at the top of the engine’s rear near the firewall on vehicles with a carburetor. To access the valve, you must disconnect the car battery’s negative terminal.

Will a fuel cleaner clean an EGR valve?

No the EGR passes exhaust gas that contains fine carbon particles. The carbon sticks to the valve and clogs it. Injector cleaner can only clean the inlet ports and back of inlet valves on port injection petrol engines.

What happens when you unplug your EGR?

EGR valve is plumbed between the intake manifold and the exhaust manifold. Removing the EGR will result in a large vacuum AND exhaust leak.

Can I change EGR valve myself?

Although it’s possible to complete an EGR valve replacement yourself, due to the need to access the engine chamber, it’s not recommended unless you’re an experienced mechanic.

Can I drive with a bad EGR valve?

Technically you can drive without a working EGR valve.
The role of your EGR valve is to reduce the number of toxic NOx gases in the air, so if it isn’t working quite right, more toxic gases will be released into the air. For this reason, we don’t recommend driving without a working EGR valve for too long.

What are symptoms of bad EGR valve?

What are the symptoms of a failing EGR valve?

• Your engine has a rough idle.
• Your car has poor performance.
• You have increased fuel consumption.
• Your car frequently stalls when idling.
• You can smell fuel.
• Your engine management light stays on.
• Your car produces more emissions.
• You hear knocking noises coming from the engine.

What happens if you don’t fix EGR?

Increased emissions: The primary role of the EGR valve is to recirculate a portion of exhaust gases back into the intake manifold, reducing the amount of nitrogen oxide (NOx) emissions. If the valve stays open or doesn’t close completely, it may result in increased emissions and potentially harm the environment.