AHG Auto Service » Make » Acura » Where is the ECU on a 1990 Acura Legend?

Where is the ECU on a 1990 Acura Legend?

The Electronic Control Unit (ECU) on a 1990 Acura Legend is located under the passenger seat . There is an inspection window on the ECU, which is used to read out error codes by counting the blinking of the LED .

What are the symptoms of a bad ECU?

These may include poor engine performance, stalling, misfiring, rough idling, poor fuel economy, check engine light, or no start condition. Some of these symptoms may also indicate other issues, such as faulty sensors, wiring, or spark plugs, so you need to rule them out before blaming the ECU.

Why was the Acura Legend discontinued?

It remained a popular model until 1995, when increasingly fierce competition in the luxury market led Acura to put it out to pasture. Thus, the Legend was never one of the many Acura models manufactured in the USA since the mid-90s.

Where is your ECU located?

But typically they are found in the engine. Compartment. Under the passenger. Floorboard under the seats or behind the kick panels. If you are not able to find the ecm with your manual.

How fast is the Acura Legend?

147mph for AT and I did experience my 92 LS 5spd at 142mph and my bro 93 L at 141 mph. some one had post pic that they had go over the 140 mph mark.

Is the ECM and ECU the same thing?

What Do ECM and ECU Stand For? ECM stands for Engine Control Module, and ECU is short for Engine Control Unit. These two acronyms represent the same component and are used interchangeably.

Where is the ECU module located?

Either inside of the engine bay or inside the side of the passenger side footwell,left or right hand side of the vehicle depending upon whether it’s left or right hand drive !

What is the engine code for a 1991 Acura Legend?

C32A1
Second generation (1991)

Second generation
Engine 3.2 L C32A & C32A1 V6
Transmission 4-Speed Automatic 5-Speed Manual 6-Speed Manual (Type-II)
Dimensions
Wheelbase Coupe: 111.4 in (2,830 mm) Sedan: 114.6 in (2,911 mm)

Where is the ECU on the Acura Integra?

Follow these detailed steps to remove the old ECU and install the new one in your Acura Integra: Locate the ECU: The ECU of an Acura Integra is typically located beneath the dashboard on the passenger side. You might need to remove the glove box or other components to access it.

Where is the ECU on a Acura TSX?

The TSX ECU is located between the driver’s and passenger’s foot-well. Tools needed: Screwdriver, ratchet and 10 mm socket. By the drivers right foot there is a triangular plastic panel.

Where is my ECU located?

Often varies from car model to car model this is why when it comes to locating your ecm. It’s best to consult your vehicle’s owner manual to find the exact location. But typically they are found in

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment