Where is the clutch actuator on a Ford Focus?

The Clutch Actuator on a Ford Focus
The clutch actuator on a Ford Focus is located in the transmission housing. To access it, you will need to pop the hood and work in the engine compartment. Start by removing the air box, and underneath it, you will see the actuator motors. The clutch actuators themselves are contained inside the bell housings on the sides of the motors.
It’s worth noting that there are two types of actuators in the Ford Focus: shift actuators and clutch actuators. The clutch actuators are located on the outside of the bell housings, while the shift actuators are inside the housing. So, when looking for the clutch actuator, make sure you are not confusing it with the shift actuator.
If you are experiencing issues with your clutch actuator and need to replace it, you can find replacement parts online or at a Ford dealership. Some popular options include the AE8Z7C604A Transmission Clutch Actuator and the LABLT Automatic Transmission Clutch Actuator . It’s recommended to consult a professional or refer to a step-by-step guide if you plan on replacing the clutch actuator yourself.
I hope this information helps! Let me know if you have any other questions.

How do I know if my clutch actuator is bad?

Some of the symptoms of a bad clutch actuator are: Warning lights: If your clutch actuator is failing, warning lights will pop up in your dash. Usually, it is the transmission warning light or another variant of that warning light that pops up when your clutch actuator fails.

What is clutch actuator?

The clutch actuator is part of the overall clutch system and can operate either mechanically or hydraulically. With a clutch actuation system, the driver controls the interruption of power transmission. by pressing the pedal.

How much does it cost to repair a clutch on a Ford Focus?

The average cost for a Ford Focus Clutch Replacement is between $786 and $904. Labor costs are estimated between $449 and $567 while parts are typically priced around $337.

What happens when an actuator goes bad?

On hot on. The flip side the third symptom could be the temperature stuck on cold similarly. To the previous. Symptom.

How many clutch actuators does a Ford Focus have?

Compatible with 2012-2017 Ford Focus & 2011-2017 Ford Fiesta
You may need two clutch actuators for the top & bottom. Transmission has 2 in it, an A and B. The code could give you which one you need to replace.

Where is the clutch actuator located?

The clutch actuator is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox.

What does the clutch actuator do in automatic transmission?

The clutch actuator is part of the overall clutch system, acts as a link between the gearbox and the pedal, allowing you to engage the gears as you drive. With a clutch actuation system, the driver controls the interruption of power transmission.

What happens when an actuator fails?

When an actuator fails, it could result in catastrophic explosion, spill, chemical release, property damage, power loss, environmental contamination, injury, or even loss of life. Actuators trigger immediate shutdowns which could result in costly production downtime.

What is the code for clutch actuator on Ford Focus?

Diagnostic trouble code (DTC) P0902 stands for “Clutch Actuator Circuit Low.” The code is set once the PCM detects a low voltage or resistance condition in the clutch actuator circuit. The clutch actuator circuit activates and disengages the clutch or clutches on a dual-clutch automatic transmission.

Is the clutch actuator part of the transmission?

I’m actually a service adviser at a Ford dealership. Yes, there are two actuators located in the transmission control module (TCM). These actuators operate the shift actuators (or clutch forks) A and B.