Where is the cigarette lighter fuse on a 2010 Dodge Challenger?

Location of the Cigarette Lighter Fuse on a 2010 Dodge Challenger
The cigarette lighter fuse on a 2010 Dodge Challenger is located in the Rear Power Distribution Center (trunk). Specifically, the fuse you need to check is fuse number 9, labeled “Power Outlet”. There is also another fuse, number 18, labeled “Instrument Panel Cigar Lighter / Selectable Power Outlet,” which you may want to check as well.
To access the Rear Power Distribution Center, you will need to open the trunk and locate the spare tire well. Once you open the fuse box, you will find a numbered layout of the fuses on the inside of the fuse box lid. Fuse number 9 and fuse number 18 should be located in the Rear Power Distribution Center, and they are both yellow 20 amp fuses.
Please note that the information provided is specific to the 2010 Dodge Challenger model. The location of the fuses may vary for other years or models.

What would cause the cigarette lighter fuse to keep blowing?

Too much heat will melt wires and can even cause a fire. The only reason a fuse will “blow” is because of a short circuit. That is a point where a wire connects directly to a ground and more current tries to pass through the wire than it is designed to handle.

Where is the cigarette lighter fuse located in a 2010 Dodge Charger?

Out. Now what we have here fuses and relays cigarette lighter fuse. Okay it’s pretty straightforward. But now let me. Just. Talk about something else. Guys people never almost test fuses. And realize.

Why is my 12V cigarette lighter not working?

A faulty fuse or bad wiring is also a common reason for a car cigarette lighter not working. This can be a result of extra amperage which makes it difficult for the socket to handle. Additionally, plugging in inappropriate devices can also cause wiring problems or may lead to a blown fuse.

Can you use a 20 amp fuse for a cigarette lighter?

Yes, definitely! You will not lose functionality of the outlet. With this converter, you don’t have to “tap in” necessarily in the traditional way. All you have to do is remove the fuse for the cigarette lighter, insert the converter, then insert the 20 amp fuse into the converter.

Why is my 12V socket not working in my car?

The 12-volt outlet in your car is connected to a specific fuse in the vehicle’s fuse box. If this fuse has blown, it will prevent the outlet from functioning. You can check the fuse box to see if a fuse has blown and replace it if necessary.

What size fuse for a 12V USB socket?

Input current 8-30Vdc, at 12V the input current is 0.2-0.25 Amps. For circuit protection the correct fuse to use should be a 3A fuse.

What fuse do I need for 12v cigarette lighter?

Re: installing a 12v cigarette lighter… what size wire and what size fuse? The main purpose of a fuse is to protect the wire downstream from overheating. In general, that would be 15 amps for #14 and 20 amps for #12.

What size fuse for 12v car charger?

If this is for general purpose power in a car or boat, I would suggest wiring the 12 volt cigarette socket to the battery with a 20 amp fuse in the circuit. If you use a 10 amp fuse, it may not be a high enough rating for accessories such as air compressors and power inverters.

Where is the cigarette lighter fuse located?

Depending on the make and model of your car, the fuse for the cigarette lighter or accessory outlet may be called something else. However, many cars label the lighter fuse as “LTR,” which stands for “lighter,” and you can find it in the fuse box under the hood.

What fuse for cigarette lighter in a Dodge Charger?

And so to do that you pop the trunk. There. Make your way to the back. And you’re gonna have to lift this up you can hold it up with this little hook right here come down in here.