AHG Auto Service » Make » Ford » Where do you put coolant in a Ford Transit Connect?

Where do you put coolant in a Ford Transit Connect?

Adding Coolant to a Ford Transit Connect
The coolant in a Ford Transit Connect is essential for maintaining the proper functioning of the engine and preventing overheating. Here’s where you can add coolant to a Ford Transit Connect:
Location:
The coolant in a Ford Transit Connect can be added at the plastic overflow tank, which is located on the driver’s side, closer to the windshield. The tank is ball-shaped and has a radiator safety cap. It should be marked and contains orange antifreeze. It’s important to note that the coolant reservoir should be checked when the engine is cold for an accurate reading.
Type of Coolant:
The Ford Transit Connect uses Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze. It’s recommended to have some extra coolant and antifreeze in the trunk of the car at all times to deal with any potential leaks that could leave you stranded.
Adding Coolant:
Adding engine coolant to a Ford Transit Connect is a relatively straightforward process. The coolant reservoir is easily accessible, and the owner’s manual should be consulted to determine the correct type of fluid to add. It’s important to check the engine when it is cold for an accurate reading and to ensure that the correct type of fluid is used.
In summary, the plastic overflow tank on the driver’s side, closer to the windshield, is where you can add coolant to a Ford Transit Connect. It’s important to use the recommended type of coolant and to check the engine when it is cold for an accurate reading.

Do I add coolant to radiator or reservoir?

Remove the cap completely. If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When coolant rises to the cold fill line, replace cap and tighten it until you feel it click.

What kind of coolant does a 2018 Ford Transit Connect take?

Peak OET North American yellow 50/50 pre-diuted; 1 gallon.

What coolant does Ford Transit Connect use?

Prestone – Antifreeze and Coolant: 50/50 Ready To Use, Dex-Cool Compatible, 1 Gallon (Part No. AF850)

Is antifreeze the same as coolant?

Well, antifreeze and engine coolant are similar, but not the same. Antifreeze is a concentrated, glycol-based liquid that must be diluted with water before use – at which point it is referred to as coolant. Alternatively, you can purchase pre-mixed engine coolant, a ready-to-use solution of antifreeze and water.

What class is a Ford Transit Connect?

Compact van Leisure activity vehicle

Ford Transit Connect
Class Compact van Leisure activity vehicle
Body style 4/5-door panel van 4/5-door LAV
Layout Front-engine, front-wheel-drive
Chronology

Where do you put coolant in Transit Connect?

And I keep an eye on my coolant level as I go. Now as I can see my coolant has reached the max level. There. I can reinstall the coolant cap on the reservoir.

Can I add engine coolant myself?

If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself or a 50/50 mixture of concentrated coolant and distilled water. When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click. Close the hood.

What are the symptoms of low coolant?

Low coolant makes it harder to drive in hot weather and sub-zero temperatures. Low coolant also causes your engine to burn fuel more quickly. You will notice symptoms such as poor fuel economy, a loss of acceleration, and the car’s high-temperature gauge getting close to the red if your car is low on coolant.

Where is the coolant reservoir located?

Most of these coolant reservoirs are made from durable plastic and are installed on the upper right hand side of your car’s engine compartment. These are an integral part of a car’s system because they help its entire cooling system.

Is coolant and antifreeze the same thing?

Key Takeaways:
Coolant is a fluid used in the radiator to remove the engine’s heat. Antifreeze is an additive mixed with water or coolant to prevent your car engine from freezing in cold weather. The ratio of water or coolant to antifreeze should be 50:50.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment