Where do jumper cables go on a Chevy Equinox?

To connect jumper cables on a Chevy Equinox, follow these steps:
1. Locate the positive terminal: The positive terminal on the Equinox is marked with a plus sign. It is located on the underhood fuse block, on the driver side. Lift the red cap to uncover the terminal.
2. Locate the negative terminal: The negative terminal is a stud behind the metal tab stamped with GND, near the driver side strut tower.
3. Connect the positive cable: Attach one end of the positive jumper cable to the positive terminal on the battery of the car that is providing the jump. Connect the other end of the positive jumper cable to the positive terminal on your Equinox .
4. Connect the negative cable: Attach one end of the negative jumper cable to the negative terminal of the working (live) car’s battery. Connect the other end of the negative jumper cable to the negative grounding stud for the discharged battery. Make sure the negative cable is away from the dead battery and not near engine parts that move .
Remember to always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
I hope this helps! Let me know if you have any other questions.

Where can I put the negative jumper cable?

Attach the negative end of the cable (typically black) to the negative battery terminal. This is normally marked with a “–“ sign on the booster car. Connect the other end of the negative cable. Be sure that it’s attached to an unpainted metal surface on the engine of the dead car.

How do you jumpstart a 2016 Chevy Equinox?

So all you do is just remove the screw. And then you’ll have your access. Now I was having a tough time looking for the actual negative. So where in the world is a negative on this vehicle.

How do you jumpstart a Chevy Equinox battery?

And black on negative. And that’s just the basics of jump starting a battery. And then of course get your power connected.

Where is the battery on a equinox?

Look for it on the driver’s side of the engine bay, near the front of the vehicle. If your car isn’t starting, checking the battery should be the first step, and you may try jump-starting it if possible.

Where do you put jumper cables on an equinox?

So I would just peel back the protective rubber boot and hook my negative cable. Here.

How to boost a 2015 Chevy Equinox?

As you can see down here. And first thing you want to know is how to jump start this thing so as you can see up here we’ve got a red cap for the positive for a positive terminal it’s actually not on

How do you jump a battery in a 2017 Equinox?

Hey everybody welcome back to the channel on today’s video I’m gonna show you how to jumpstart your Chevy Equinox. Okay. So we got the hood popped and under the hood you’re gonna see your ground right

Where do you connect jumper cables?

Here’s the correct order for your jumper cables:

1. RED to DEAD: Connect the red clip to the positive terminal on your dead battery.
2. RED to DONOR: Connect the red clip to the positive terminal on the donor vehicle’s working battery.
3. BLACK to DONOR: Same car!
4. BLACK to METAL: Back to the dead battery.

Where do the jumper cables go on a 2016 Chevy Equinox?

It’s marked clearly. And plus it has a red cap on it for jump-starting this car.

Where do you put jumper cables on a dead battery?

Connect your cables
Connect one end of the red clamp to the positive terminal of the working vehicle. This is denoted by a circled (+). Connect the other red clamp to the positive terminal of the dead car battery. Connect a black clamp to the negative terminal of the working vehicle.