When should I replace my serpentine belt on my Subaru Forester?

When to Replace the Serpentine Belt on a Subaru Forester
The optimal time to replace the serpentine belt on a Subaru Forester depends on various factors, including the vehicle’s maintenance schedule, the belt’s condition, and the manufacturer’s recommendations. Here’s what the search results reveal:
Maintenance Schedule and Recommendations:
The maintenance schedule for the Subaru Forester typically includes inspecting the serpentine belt at regular intervals, such as every 30,000 miles. However, the specific replacement interval may not be explicitly mentioned in the vehicle’s maintenance schedule. Some sources suggest replacing the serpentine belt around the 60,000-mile mark, while others mention intervals of 78,000 miles or even 90,000 miles as recommended by Subaru.
Belt Condition and Wear:
The condition of the serpentine belt should also be considered. While some owners have reported replacing the belt at around 78,000 miles even though it still looked good, others have mentioned that the belt can potentially last over 100,000 miles due to its quality and durability.
Manufacturer’s Guidance:
It’s important to consult the Subaru owner’s manual or contact a Subaru service center for the specific replacement schedule for the serpentine belt in the Subaru Forester. The manufacturer’s recommendations can provide valuable guidance on when to replace the belt for optimal performance and reliability.
In summary, while the maintenance schedule may not explicitly state when to replace the serpentine belt, considering factors such as the vehicle’s mileage, belt condition, and manufacturer’s recommendations can help determine the appropriate time for replacement.
If you have any further questions or need additional information, feel free to ask!

Should I replace the tensioner when I replace the serpentine belt?

Should the tensioner be replaced when replacing the serpentine belt? Not necessarily, if there is good tension when you remove the belt, the spring is good, spin the pulley and see if there is any looseness or noise in the bearing. If there is, replace the tensioner.

Do I need to replace tensioner with serpentine belt?

Should the tensioner be replaced when replacing the serpentine belt? Not necessarily, if there is good tension when you remove the belt, the spring is good, spin the pulley and see if there is any looseness or noise in the bearing. If there is, replace the tensioner.

Will a new serpentine belt make car run better?

Serpentine belts give a very minimal horsepower increase. The main advantages of using them are simplicity and better engine harmonics due to running all accessories on a single plane.

How often are serpentine belts typically replaced?

between 60,000 and 100,000 miles
On average, serpentine belts should last between 60,000 and 100,000 miles. However, if you’re only putting a few thousand miles annually on your vehicle, don’t use that mileage interval as the sole guide for when to replace the serpentine belt.

Will a timing belt last 200000 miles?

The best guide would be the car handbook to see what the manufacturer mileage recommendations are. It is safer to replace the timing belt even earlier than the manufacturer recommends. In general, however, timing belts needs to be replaced from 60,000 miles up to 150,000 miles.

How much does it cost to replace serpentine belt?

Whether you go to the mechanic or do it yourself, replacing a serpentine belt costs $58 to $126. The price of a serpentine belt starts at around $25 and goes up to $75 at most. It typically takes about an hour to replace the serpentine belt, and if you know some car repair basics, you could change the belt yourself.

How do I know if my serpentine belt needs replacing?

Bad serpentine belt symptoms

1. Squeaking, squealing or chirping sound from under the hood of the car.
2. Check engine light or battery light is illuminated on your dashboard.
3. A/C isn’t working.
4. Power steering isn’t working.
5. The engine’s temperature is high or overheating.
6. Smell of burnt rubber.

How many miles should a serpentine belt last?

Your serpentine belt was made to last. Under ideal circumstances, your car’s serpentine belt should last 60,000–100,000 miles. It’s important to replace this belt as part of your vehicle’s scheduled maintenance (even if it looks okay) to avoid it breaking while you’re on the road.

How long does a Subaru Forester timing belt last?

105,000 miles
Timing belt replacements:
Subaru timing belts need to be replaced after seven years or 105,000 miles; whichever comes first. Replacement cost starts at $530 (will vary by model)

How much does it cost to replace a timing belt Subaru Forester?

$409 to $919
Belts themselves aren’t that expensive. The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).